- Title: MyPhone Rio 2 Fun Stock Firmware V1.09
- Listed: 09/15/2015 2:54 pm
- ROM Version: 5.0 Lollipop
You must be logged for ROM download.
3793 total views, 6 today
3 Total favorites
STOCK MYPHONE RIO 2 FUN FIRMWARE
-1.3 GHZ MT6582M Quad Core Processor
-Mali 400MP2 GPU
-5MP AF Back Camera
-5MP FF Front Camera
-Android 5.0 Lollipop
-Upto 3g/HSPA+ Data Connectivity
-Light, Proximity, Orientation, Gravity and Light Sensors
-2,000 MAH Battery
PART 1: (INSTALLING DRIVERS)
-Download Tinno Drivers
-Install on your Computer (Follow on Screen Instructions)
-Attach your MP R2F to your Computer using your USB Chord without Battery first.
-The Computer should detect it(Installing New Hardware)
-If not detected, put the Battery back on you MP R2F or change USB Chord
PART 2: (APPLYING FIRMWARE)
Using Smart Phone Flash Tool(Did not test this on my MPR2F but have use this on my other MTK Devices)
-Download SP_Flash_Tool_v5.1352.01.zip and MPR2F-Firmware.rar
-Copy the downloaded files on you Computers Desktop and Extract the 2 files.
-On the extracted SP_Flash_Tool_v5.1352.01.zip, right click on flash_tool.exe and Run as Administrator
-Click Scatter-loading button on the upper right side
-Find and select the MT6582_Android_scatter.txt inside the extracted MPR2C-Firmware.rar
-Select Firmware Upgrade on the selection below the Scatter-loading field
-Click Download Button on the top
-Connect your MPR2F on your Computer without battery, SPFT will detect your device if you installed the drivers correctly
-SPFT will start loading, wait until finish, you will know if it finish loading when you see a Green Check Pop-up.
NOTE: This method most likely will corrupt the IMEI of your phone, you can search for restoring IMEI on YouTube or Google.
※Please make a backup of your device before installing or updating ROM