- Title: KitKat Factory v1 for ZP998 (Komu K8)
- Listed: June, 2014
- Last modified: 06/29/2014 1:50 am
- Version: v1 final
You must be logged for ROM download.
38660 total views, 6 today
1 Total favorites
DESCRIPTION
This is a factory ROM for ZP998 from a 100% Italian clone, Komu K8, a real KitKat v1 release.
No colorants, no preservatives, no ads – you just add what you want yourself.
Features:
- Real 4.4.2 KitKat, release ver. 1.0 (2014-06-28);
Root is easily done by flashing this zip through modded recovery:
https://yadi.sk/d/Fjyv4lM2VNrSK
Download rar archive, extract it (password is 123), put 4.4Root.zip on your sdcard and flash with recovery.
Xposed Framework is working, but it is not included, to keep ROM factory clean. Get it from official xda source (Xposed need root to be installed):
http://forum.xda-developers.com/xposed/xposed-installer-versions-changelog-t2714053
install, activate, reboot, and download modules, i.e. GravityBox KK
Primary partition size can be modded, just get EBR1 and EBR2 files from here:
http://forum.xda-developers.com/showthread.php?t=2455850
put these two files to the FIRMWARE folder, overwriting old files, and flash.
You may need to reboot once or twice and reset to factory settings, if partitions size is different from that in your old system!
Modded Recovery for KitKat can be found here:
https://www.needrom.com/mobile/recovery-twrp-2-7-1-0-for-zopo-zp998/
Download it, extract recovery.img, put it into FIRMWARE folder and flash.
This ROM is intended to be flashed with SP Flash Tool (included), all internal memory is lost! (IMEI intact).
Please read included manual carefully before upgrading! Use "Upgrade firmware" and NOT "Download only" in SP Flash Tool!
※Please make a backup of your device before installing or updating ROM



Member Info
GPS : in Europe the GPS was not very good and crazy in big cities like Paris, each time there is a lot of buildings
I try the GPS in South-East Asia since 1 month. Very very very good !!
In Bangkok, In Kuala Lumpur no problem, either bad or good weither.. The arrow (SYgic) is always on the road ..never go everywhere around !
So that is not an hardware problem !! I have the same phone than in Europe !!
I tried in car, buses, motorbike, walking … all situations and i had never have problems.
The problem in Europe is something to change in the software ..not in the hardware. It is something to adjust in the software. I think zopo engineers ca make it
hi,can this rom work in zopo 980+ or i have to wait for another?thanks
That would be perfect, since i am starting to think that they wont make it for zp980+ official.
@ doperst , How to swap sdcard0 sdcard1 ? help me please .