Responses to “CyanogenMod 11 – Team Superluminal”

1. 

   05/17/2014
   

    

   vazor on 02/20/2015 @ 8:03 pm

   yet something about working with RUIM, information in "About system" displays following:

   PRL Version:  Unknown

   Phone number:  Unknown

   MIN:  Unknown

   In VibeUI all this fields show correct information.

    

    

   Log in to reply.
2. 

   02/14/2015
   

    

   qwet on 02/20/2015 @ 9:05 pm

   1 sim card does not send, does not accept SMS. Background sound on two sim. Wi fi slow you can not work. Slow network connection Wi fi.

   Log in to reply.
   • 

     01/27/2015
     

      

     morphic on 02/20/2015 @ 11:25 pm

     qwet, sms send/recv w/ SIM1 is known bugs in dual sim mode.

     In my tests, Lenovo CM11 Wifi is fastest device in my home network

     See attached picture: ~95Mbit, other devices gets max 80Mbit

     
3. 

   09/06/2013
   

    

   Macrom on 02/20/2015 @ 11:47 pm

   Hi morphic,

   I give a try to you rom but can't install it

   A follow this predure:

   - Downgrade to 4.2.2 rom via sdfuse to get adb commands working

   - I try to install your TS recovery that is 16MB size but lenovo doesn't reboot into recovery mode

   - I try then install other CWM recovery 12MB size as usually i did but CM11.zip doesn't install at all. Error something like "can't install over incompatible data"

   Any sugestion? I have two days to rollback to official 1503 rom…

    

    

   Log in to reply.
4. 

   09/06/2013
   

    

   Macrom on 02/20/2015 @ 11:52 pm

   Hi again,

   I fire up this line:

   sha1_check(read_file("/tmp/releasekey"),"7241e92725436afc79389d4fc2333a2aa8c20230") && abort("Can't install this package on top of incompatible data. Please try another package or run a factory reset");

   Install aborts !!!

   Log in to reply.
5. 

   02/15/2015
   

    

   akmalhak1m on 02/21/2015 @ 5:12 am

    in CWM I got an error.. "package expects build fingerprint of kiton or kintonw: this device has K910" .. which cwm recovery img to use?

   Log in to reply.
   • 

     11/13/2014
     

      

     S34d0g on 02/21/2015 @ 10:21 am

     "package expects build fingerprint of kiton or kintonw: this device has K910"

     looks like you're trying to intall a CWM recovery made for k910/k910e (two SIMs, codename kiton/kitonw) on a one-SIM, worldwide k910 (aka k910L). You need to find a recovery that works with your phone, if it exists.
6. 

   02/14/2015
   

    

   qwet on 02/21/2015 @ 11:03 am

   After opening and closing Wi fi konekt long. Connected Wi fi works. no internet. Helps removing the network and enter the password on the phone

   Log in to reply.
   • 

     02/15/2015
     

      

     pUppee on 02/21/2015 @ 11:36 am

     thats not the ROM problem, dont flood here please
7. 

   04/10/2014
   

    

   mi6t0 on 02/21/2015 @ 12:58 pm

   morphic,

   I can confirm the ROM works overall flawlessly (using version from 19th). There are a few bugs I can report (I am using only one SIM, therefore nothing to do with SIM cards ):

   1. WiFi – for some reason it was working terribly slow (50-150 kbps even in the home LAN). Manually selecting the 2.4 range solved that. Unfortunately the fix worked yesterday and the bad speed was back today in the morning. So I had to manually switch to 5gz, then back to 2.4. Will keep an eye on that.

   2. Sometimes, if I reboot to recovery, it canot read the phone's sd card. So I can't flash any zips from the internal memory. A power cycle usually helps. Happened both with TWRP and your CWM

   3. Gapps. The one liked by you doesn't properly work with gmail's push notifications. Installing these Gapps helped.

    

   With the balanced profile I got abobe 38000 Antutu points! Quite amazing. Meaning with performance it may even be higher

   Battery life is OUTSTANDING, especially in idle mode. Takes 0.3% per hour when wifi and data are off. That was unthinkable with the VibeUI.

   Functions work like charm. No FCs, good reception, the modem seems to be more stable than my previous VibeUI 1447.

   Thank you for your contribution! My phone has now a new life. 

   Log in to reply.
8. 

   01/27/2015
   

    

   morphic on 02/21/2015 @ 3:20 pm

   For those who are interested,
   you can get more detailed modem info:

   1. Open Dialer
   2. Type the following sequence '*#*#4636#*#*'
   3. Open Phone Information

   Log in to reply.
9. 

   09/06/2013
   

    

   Macrom on 02/21/2015 @ 4:25 pm

   Hi again,

   I discovered that can't install this ROM because may bootloader is locked.

   When run crowds stack.bat tool, i have troubles with command "fastboot oem unlock" because prompt stucks at "…" and never ends..

   I have to unplug cable to continue but recovery install commands fails and the phone is rebooted without sugested recovery nor bootloader unlocked

   Any ideas?

   Regards

   Log in to reply.
10. 

    09/06/2013
    

     

    Macrom on 02/21/2015 @ 4:29 pm

    I try de stack.bat command for second time and supersu prompts to grant access to adb shell.

    Ended OK bootloader unlocked!!!

    Thank you.

    Log in to reply.
    • 

      09/10/2013
      

       

      ekkilm on 02/21/2015 @ 5:16 pm

      Have you root before you tried to unlock the bootloader? (Because you have to and give the permission for the adb shell ) But good to hear that you got it successful done.
    • 

      09/10/2013
      

       

      ekkilm on 02/21/2015 @ 5:32 pm

      

      This NOTE is from our recovery site.