Ulefone
  • Title: K1 Turbo 4.4 Update
  • Listed: 01/08/2015 12:19 am
  • ROM Version: KITKAT 4.4.2
  • You must be logged for ROM download.


Overall Rating : 48

24757 total views, 1 today

3 Total favorites

2257 Total downloads

  

K1 Turbo 4.4 Update
K1 Turbo 4.4 Update - Image 1

Author adMember Info

funkstardelux


DESCRIPTION


Taken from www.mykingzone.de . I take no responsiblity for any damage caused by this ROM

Offical 4.4 update from Kingzone … Finally it has arrived …

The following is translate from german to english

The file KK442-update-for-King Zone K1 Turbo.rar contains the following folders.

Driver: Should you come during the flash process prompts to install drivers, you can find it here
Flash Tool: With this program, the King Zone K1 Turbo is flashed
ROM: In this folder, the King zone update is stored. Please enptackt the archive contained therein 0502L049A_E19_K168AB125MXXE4 (K1_TURBO_B42) _EC31_IND_FULL.zip

!!!! Attention please secures your data before you reflashing the K1 Turbo. For any damage to the unit due to improper handling
arise, we can not take responsibility !!!

Manual Update Kitkat on King Zone K1 Turbo

1. Start Flashtool.exe from the subfolder flash tool
2. Normally, an already loaded in the MTK_AllInOne_DA.bin Download Agent. If this is not the case, please navigate to the file in SP_Flash_Tool_v5.1352.01.
3. Download the file MT6592_Android_scatter.txt Scattering from the unzipped folder ROM
4. Please choose in the "drop down menu", select "Firmware Upgrade".
5. Press Download
6. Connect the phone without battery via USB
7. Insert the battery
8. Now the Flash tool should have detected the device, red bar with 100% DA and download the flash process should start
9. The flash process has successfully completed and when the green checkmark appears.

Should you have problems with the flash process, so I can you the Declaration @ G-gffd put your heart. Here the driver installation and another driver is available.

1. all Mediatek (and others who are using cell phones & Android combined) delete USBDeview
2. open the Device Manager next to it
3. Driver from here: docs.google.com/file/d/0B1x1BQ…1VlcDk0TnJ0VEk/edit?pli=1 download & extract
4. if the "preloader" appears, right click on it, "Update Driver Software". To the extracted driver folder navigate to the folder of your Betriebsytems. Next, now the appropriate driver for the preloader should be installed. @ Android Figurines de: for me it did not work with the driver in your .rar file, there was no preloader driver gefunde. When the driver specified by me it worked without problems for me. Whether missing the correct driver for you, I can not say clearly is only in "your driver" and my K1 preloader a different hardware ID is available, and therefore the Windows driver manager the driver is not accepted.
5. Now the Mediatek Preloader USB Vcom must be visible in the device manager! Otherwise it does not work!
6. Flash tool with andmin right starten.So must look like.

see Appendix

7. Select Firmware upgrade (at least in the second trial when the first error aborts with download with a PMT. Depends somehow with the partition table together, how exactly n)
8. Battery from the K1, click Download – Append -> bar at the bottom is red, battery clean, wait until the green tick comes.
9. Voila, you have KitKat on the K1

The unit can now be restarted. Please give the device a little time after it was re-flashed are a few things in the background
carried out. It may also drive again to restart.

If the device after restarting find no wireless network, it may be that the IMEI entry has been deleted. If that is so, no problem, here I'll show you
how you can fix that.

The IMEI number of the two SIM slots can be found on a sticker behind the battery. So please can extract the battery and you quoted the two
IMEI numbers.

Instructions restore IMEI numbers on King Zone K1 turbo after reflash to KK

1. Write down the IMEI number
2. Please give the dial pad of the phone following code * # * # 3646633 # * # * Your enters the so-called. "Engineer Mode"
3. Please wipe replaced by the item "Connectivity"
4. Selects please "CDS Information"
5. In the next menu, please select the "radio information"
6. There appear two entries with "Phone 1" and "Phone 2". It involves the SIM slots 1 and 2
7. Selects the appropriate SIM slot, in my case now "Phone 1" means the SIM slot 1
8. In the upper part of the window you now see the AT + entry, please delete this
9. Give now please ECHR AT + = a 1.7 "IMEI SIM Slot1". It is important that there is a space between the AT and the + sign. All other entries please ihne space. Take care to use the double quotes.
10. Now click on "Send a command"
11. The IMEI number has been set, please start the new K1 Turbo

Do you want to put the IMEI for the SlM slot 2, please fürht the points 1-8 as above described and made changes the input point 9 as follows.

AT + ECtHR = 1.10 "IMEI SIM Slot2"

 

 

 

Please post comments / screenshots in english to help others

 

THE ROM IS FREE .. IF YOU WANT TO DONATE OUT YOUR GOODWILL THEN PLEASE DO BUT AGAIN THE ROM IS FREE

 

ENJOY


Donate with PayPal to funkstardelux

Share Button

※Please make a backup of your device before installing or updating ROM

85 Responses to“K1 Turbo 4.4 Update”



  1. the1




    08/03/2014
    Posts: 47

    Germany

    dont have any of those issues zopoheini mentioned. Bluetooth working for shower radio (dont have smartwatch) sensors your mentioning seem working at least i can play asphalt 8 with motion control, nothing flashing when connecting usb, no problem with overwrtiting gps.conf manually or using fastergps to set it up.

     

    I would say you had either a bad flash (return to latest JB stock, then reflash kk) or a bad root (kingroot?)

    to solve this flash recovery

    https://www.needrom.com/download/twrp-custom-recovery-2-8-2-0/

    put this file on your sd card and flash it in recovery:

    http://download.chainfire.eu/396/SuperSU/UPDATE-SuperSU-v1.94.zip?retrieve_file=1

    hope i could help

  2. funkstardelux




    10/07/2014
    Posts: 25

    United Kingdom

    No problems here either…gyroscope never worked even in jelly bean but other sensors work fine.

    Image size problem you mention might not be the cameras fault but if you select full size screen that is larger than the camera sensor so it has to change to compensate for the ratio change.

    As I said this is not my rom but kingzones..I have had no problems if you have then you should msg kingzone via emal or facebook.





  3. 10/17/2014
    Posts: 2

    Italy

    Good rom ,all is OK .. Suggestions for root ?





  4. 10/13/2014
    Posts: 6

    Italy
    I upgraded to 4.4 by downloading the rom from the site kingzone .
    the upgrade has been successful , but I have problems with the data connection . I H3G .
    calls work but not the data !! there some fix ?
    thank you




  5. 11/03/2013
    Posts: 3

    Germany

    First: It works good.

    The Installation with flashtool, root (i use iRoot) and restoreof all data with Titanium Backup was easy but the restore of the IMEI have took a bit of time. All instructions i found here and in the german forum http://decuro.de/forum/index.php/Thread/469-Android-4-4-Kitkat-f%C3%BCr-das-Kingzone-K1/?pageNo=1 doesnt work.

    The solution of this Problem: only command AT +EGMR=1,7,"IMEI SIM Slot1" and AT +EGMR=1,10,"IMEI SIM Slot2" (with the comma behind the 7 or 10)  works for me.

     

     

     

     

     





    • 07/13/2014
      Posts: 1

      Germany

      Thanks you saved my day.   Your instructions worked for me. 

      The solution of this Problem: only command AT +EGMR=1,7,"IMEI SIM Slot1" and AT +EGMR=1,10,"IMEI SIM Slot2" (with the comma behind the 7 or 10)  works for me.





  6. 10/13/2014
    Posts: 6

    Italy

    not work for me..imei write failed.

    any solution ?

     





  7. 10/13/2014
    Posts: 6

    Italy

    work !!! but the data mobile not work…? why ?

    but in 4.2.2 work all !!!





  8. 11/04/2013
    Posts: 1

    Israel

    When I tried to upgrade firmware I got this error message:

     BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)

    [EMI] Obtain DRAM Failed!
    [HINT]:
    Please check your load matches to your target which is to be downloaded.

    and now my phone is dead!! :\

  9. funkstardelux




    10/07/2014
    Posts: 25

    United Kingdom

    Found a problem ..my mobile data does not work..re-entered apn settings etc..still nothing.

    Anyone else okay or have mobile data problems





  10. 07/12/2014
    Posts: 11

    Spain

    Gread job, thanks.

    Regards


Leave a Reply

You must be logged in to post a comment.

banner