- Title: LeTV X500/1S
- Listed: November, 2015
- Last modified: 11/27/2015 2:38 pm
- Version: 5.5.008S
You must be logged for ROM download.
55908 total views, 6 today
24 Total favorites
DESCRIPTION
LeTV X500/1S – Original ROM from LeTV – 5.5.008S
- Android 5.0.2
- Build: 5.5.008S
- Only English & Chinese language
- Not rooted & no gapps (but follow my guide further down to get both!)
If you have the LeTV X500/1S with an unoriginal ROM (from one of the shops who install a modified ROM with multilanguage) but want the original ROM from LeTV follow these steps:
1. Enable USB debugging on the phone.
2. Download the file from here called "S1_x500-CN-OP-DBXCNOP5500811172S-5.5.008S.zip". Rename it to "update" (with the extention it is named "update.zip") and copy the file to the root of the phone.
3. Shutdown the phone.
4. Hold volume up and the power button together, as soon you see the LeTV bootlogo, let both go again, and it should boot into the stock recovery.
5. Now check Clear Data so both Update system and Clear data are checked – and then press the Start button
6. Now it will start flashing, now just wait for 10 minutes, and it should boot up and you have a clean new original LeTV system – done!
Now let's install TWRP so we can get ROOT and also install the GAPPS:
(You can also install Gapps via the "Google Installer APK" here http://www76.zippyshare.com/v/DqMeYkMQ/file.html – IMPORTANT: follow the videoguide here https://www.youtube.com/watch?v=q8ZidFOzl-k but with that it will not be permanent, so if you factory reset the phone, the Gapps will be gone, and you need to use the Google Installer again to reinstall the Gapps. If you use the method for TWRP it will be permanent and stay!)
1. Enable USB debugging on the phone.
2. Be sure to have installed ADB drivers, you can install http://pdanet.co/a/ for that (this is important to have a working ADB or it will not work!)
3. Download TWRP_ROOT.rar from in here. Unpack the rar file on the PC to C:TWRP_ROOT
4. Connect phone with the PC, copy the "X500-ROOT.zip" file (found in TWRP_ROOT.rar) into the root of the phone and also copy the ui.zip to the phone and place it in Phone storage/TWRP/theme/ui.zip (this will make the TWRP recovery english when you enter it, else it will be displayed in all chinese)
Copy also "open_gapps-arm64-5.0-nano-20151114.zip" to the root of the phone and "UPDATE-SuperSU-v2.46.zip"
5. Still connected, run the recover.bat on the PC inside the TWRP_ROOT directory
(If there comes a popup on the phones screen just set allow always USB debugging on the phone)
- A commandpromt screen also appears on the PC
- Press Enter there will be a black screen on the phone with a tiny text on bottom left saying fastboot.
- Enter 2 in command prompt and then press Enter
- On the phone there will be a black screen with tiny texts in the middle.
- Press Enter again and the phone will reboot in TWRP recovery mode that should be displayed in english
6. If you want to ROOT the phone (you can also skip this if you want) then choose in TWRP the Install button and flash the file in root (sdcard) called "UPDATE-SuperSU-v2.46.zip" reboot and the phone will be rooted.
7. If you want to flash Gapps/Play Store then choose in TWRP the Install button and flash the file in root (sdcard) called "open_gapps-arm64-5.0-nano-20151114.zip" and reboot
8. Done!
9. IF you should experience battery drain because of a WiFi BUG, you can also via TWRP try to flash the file called "x500_wifi_fix_flashWithTWRP.zip"
If you want to remove TWRP recovery, and flash the stock recovery:
Then go into the C:TWRP_ROOT folder and there you find recovery.img and TWRPrecovery.img – where the recovery.img is the original one. Just swap these 2 files, and run the recover.bat again from step 5. And it will flash the original back on the phone! /Guide by s7yler
If you want the X500 ROM with multilanguage and an app drawer then download the:
"Letv_X500_multilanguage_rom(but_no_OTA).rar" but the bad thing is that this ROM doesnt support any OTA, and it may also be missing some few features, like the IR blaster and QR scanner app is not included. So I recommend to use the official LeTV ROM instead.
You can also try BB72's multilanguage/pre-rooted ROM on Grossoshop's page – for instructions on how to install – just translate the page to english (all credits for the ROM goes to BB72). They also have an easy installer for TWRP.
http://blog.grossoshop.net/come-installare-rom-bb72-su-letv-x500/
※Please make a backup of your device before installing or updating ROM


Member Info
My phone 16GB version and tried installing the new S1_x500-CN-OP-DBXCNOP5501001211S-5.5.010S ROM from official http://bbs.letv.com/zt/eui/le_.....1s.html
I installed it using your twrp method it works flawlessly
but the problem is, there is no camera apps in the stock ROM (after I installed so many apps)
can anyone shared camera apps from the stock rom
I dont feel like using third party camera apps yet
Hello ajikun,
Have you tried IR remote control feature? Does it work? And how about that middle button called "Live"? Does it still open chinese live stream channels? Cause I tried to remove it on 9S versioj, but no success.
hello akronas
yes it works. the ROM given from store didnt have IR but the 10s have. I've tried my changhong ac works but you have to try one by one like when you buy universal remote.
yes, live is for shortcut to letv channel or something like that. it is in chinese, I dont know how to replace it either.
is the 9s version has camera?
Is there a way to get into fastboot. I am not able to get into OS to issue adb reboot bootloader. Is there any way to get into fastboot mode ?
Hi u know how to unroot ? u need just to wipe data or do other ?
I wonder about that too.
when trying to update I cant. it said because it is rooted and it may failed.
iroot can root it if you dont mind the clutter
i downloaded the zip and named it update. now i connected my phone to my pc. but when i try to copy it to the root it says : cant copy the element. the device dont react or lost connection..
i can copy other stuff on the phone so help me plz
Hello,
Can we only root the phone and, with the Titanium application remove Chinese applications as well as the office of the left page entirely in Chinese? it would be enough for me. I 'm afraid to flash the phone.
If not, Do you know a french person who has already done ? Just to know if this person could do the same tutorial in French , because I do not really understand the method in english.
Thank you in advance,
Hi,
i cannot install TWRP on my original rom 5507s. it fails all the time : after seeing fastboot, the X500 reboots and nothing happens i would like to make a backup before flashing a new rom.
(the recovery i see is a chinese one with EUI written with 2 choices)
should i flash the recovery with flashtools?
i have a twrp recovery .. how i install the offical rom !
Thank you it is Working 5 Stars
Can anyone upload official x507 rom?