- Title: THL T100S 1363GH KK
- Listed: September, 2014
- Last modified: 10/13/2014 4:27 pm
- Version: ROM Android 4.4.2
You must be logged for ROM download.
67099 total views, 4 today
149 Total favorites
Member Info
DESCRIPTION
ROM Phone THL T100S – ROM Android 4.4.2
ONLY MT6592 + Motherboard 1363GH
Update Official ROM THL T100S version: thl_T100S.159D.A2.KK.FHD.B1B5.EN.16P256.IMX135.MT6592GWP.20141009 – V1_WCDMA
————————————————————————————————————————————————————————————————–
Update Official ROM THL T100S version: thl_T100S.159D.A2.KK.FHD.B1B5.EN.16P256.IMX135.MT6592GW.20140929 – V1_WCDMA
————————————————————————————————————————————————————————————————–
Official ROM THL T100S version: thl_T100S.159D.A2.KK.FHD.B1B5.EN.16P256.IMX135.MT6592GW.20140909 – V1_WCDMA
ATTENTION This Rom is given For a Motherboard 1363GH
If your "Build number" = " thl_T100S.159D.A2.JB9.FHD………" = it's good, else not installed this rom
Gapps include – No Rooted
Language support: Multilang
Install ROM:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6592_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
※Please make a backup of your device before installing or updating ROM
I have to revert back to Official 4.2 ROM. Installed it again using Flash Tools.
Then with TWRP updated to the 4.4 rooted version. Works for me though
. Until now there is nothing that i can complain of.
Even the LED signal now works! (It never seem to work on 4.2 version).
kaciak, the proximity sensors works for you?
The Proximity and Light sensors seems not working
light-proximity sensor LTR559 not compiled in kernel
check this site it have the sources of kernel for LTR559 and others sensors https://github.com/Sambaaa/and.....m/common/kernel
But, can we use some of them to resolve our problem?
it doesn't work. other ROMs and scatter work. but this is not working ?!?
error initializing scatter file failed. please check the scatter filename you load is legal
remove first string from scatter file – BIRDTOOLVERSION bla bla bla
You have to edit scartter file, delete the first line and the begining of the file should be #####……..
ok, now i can install it, thank you…but after that, i have no network…. hmmmm
I had the same problem, anything happened with flashtools. Everything was fine, drivers, etc, but when i connected the phone the program didnt respond.
You can just use the twrp version like i did.
Is this same version just in recovery mode.
you loose your IMEI )))
before update nvram was must be backuped ))) by mtkdroidtool for example.
now or find your nvram backup (if you have), or use maui meta tool for write new IMEI on clean nvram
I rarely use the phone as it is my secondary phone. Just having fun flashing and changing ROMs.
Today i found a problem while calling a number. As soon as the other end pick up the call i have this error: com.android.phone stop working.. bla bla bla..
If i press OK, the caller app restart with both gms signal searching for network again. If i did not press OK, i can actually continue the call…
Anyone having the same problem?
Go to "Date & Time Settings" and turn of "Automatic time zone" this sould solve the problem of com.android.phone stop working
when i flash this ROM, my phone loose the IMEI, when i wanna give it a new imei, i need rootshell for droid tools,,,,but for that i need a root on my phone, and VROOT can't root kitkat…. so i can't use it..
Smuji you have to install twrp 2.7.1 with spflash tools, change the recovery.img in the kitkat firmware folder to the new inside of zip and flash it again
Here is the twrp 2.7.1 https://www.needrom.com/wp-con.....y_SevenMaxs.zip
Next put this zip (its for rooting) in the sd card http://download.chainfire.eu/4.....retrieve_file=1
Start phone in recovery mode and click on install and in "UPDATE-SuperSU-v2.02.zip"
Your phone is rooted…
If you need to write the imei here is the tutorial:
https://www.youtube.com/watch?.....v=HprM5ZwY7HI
And here is the program to do that:
http://blog.antelife.com/rom/i.....02-20131114.rar
if you can't make it tell me
What if it wont start Download? Flash tools just do nothing.
You have to turn off phone and remove the battery, in spflash tools select scatter and click on download next put battery on the phone and connect the usb cable the install of firmware will start automaticaly