- Title: Marsapa rom KK v1
- Listed: August, 2014
- Last modified: 08/02/2014 8:22 pm
- Version: 4.4.2
You must be logged for ROM download.
26798 total views, 2 today
Member Info
DESCRIPTION
First rom based on the new firmware KK leaked on the net, you have to use to install sp flash tool v5, you download the archive, how to jb because this is the only way to install the new TWRP recovery made for KK, but the next rom will install normally through recovery.
Before flashing the fw, missing cache and userdata, you'll have to do a full wipe in recovery, power off the device and flash it in download mode.
Attention, the firmware flash may cause the loss of the IMEI then create a backup before flashing with the mobile uncle to save to sd, the first time the new fw if you do not have phone line means that you have deleted the IMEI then open the mobile uncle (already included in the rom) and proceed to restore IMEI.
Marsapa KK rom Changelog v1:
1. Deodex Full;
2. Pre-root;
3. Zipalign;
4. Int.d Support;
5. Band at 900 MHz;
6. AOSP Theme;
7. Supercamera Lenovo;
8. Walkam Sony;
9. Viper4AndroidFX;
10. Xposed framework (to be activated);
11. Gravitybox KK (to activate);
12. Tewks Script and optimization;
13.Nova launcher;
14. Miscellaneous app pre-loaded.
N.B. in the case of brom-error 1013 I think, unplug the power cord and plug it the PC, it does not open the door and most likely because of the cable is not good
If you have the new recovery twrp KK flash the rom in recovery http://www.adrive.com/public/6GvvYH/V3_marsapa_KK_v1.zip
※Please make a backup of your device before installing or updating ROM
the gps works well, but is set to Italy, then you have to change the gps.conf before you can do so by installing and setting market fastergps your country
ok, thanks for your answer. i will try it. G.
another question, my v3 is in 1.0.8 (good lcd drivers i think : 1-lg_hx8394_vdo), but should be upgrade in 1.1.5 before install your rom ?
no, flash KK in download mode o format+download
marsapa, do you know any solution for NT35512 LCD driver? My phone is V4 version, as yous, but my LCD driver is NT35512
be patient I'm trying lk.bin various other models, should there be one at the end of the same;)
HI Marsapa , I can not start the sp flash tool v5, I have WINDOWS XP SP3, help me please
PMT changed the rom;it must be downloaded
I get this error when trying to flash the rom.Why?
Hello,
I get brom error s_fthnd_file_is_not_loaded_yet (5007)
Do you know what that is? Thanks very much!
I made it through the previous error but now I have black screen and nothing works.Can somebody help me?
Solved it myself, thanks!
That's how you make it through the ''PMT changed the rom;it must be downloaded'' ERROR:
Go to format tab, tick validation, Auto Format Flash and Format whole flash except Bootloader should be activated, click start, start phone and wait for OK message, after that, the PMT error is gone. This worked for me.
stuck at boot screen Marsapa!!!!!! help