- Title: Marsapa rom KK v1
- Listed: August, 2014
- Last modified: 08/02/2014 8:22 pm
- Version: 4.4.2
You must be logged for ROM download.
26799 total views, 3 today
Member Info
DESCRIPTION
First rom based on the new firmware KK leaked on the net, you have to use to install sp flash tool v5, you download the archive, how to jb because this is the only way to install the new TWRP recovery made for KK, but the next rom will install normally through recovery.
Before flashing the fw, missing cache and userdata, you'll have to do a full wipe in recovery, power off the device and flash it in download mode.
Attention, the firmware flash may cause the loss of the IMEI then create a backup before flashing with the mobile uncle to save to sd, the first time the new fw if you do not have phone line means that you have deleted the IMEI then open the mobile uncle (already included in the rom) and proceed to restore IMEI.
Marsapa KK rom Changelog v1:
1. Deodex Full;
2. Pre-root;
3. Zipalign;
4. Int.d Support;
5. Band at 900 MHz;
6. AOSP Theme;
7. Supercamera Lenovo;
8. Walkam Sony;
9. Viper4AndroidFX;
10. Xposed framework (to be activated);
11. Gravitybox KK (to activate);
12. Tewks Script and optimization;
13.Nova launcher;
14. Miscellaneous app pre-loaded.
N.B. in the case of brom-error 1013 I think, unplug the power cord and plug it the PC, it does not open the door and most likely because of the cable is not good
If you have the new recovery twrp KK flash the rom in recovery http://www.adrive.com/public/6GvvYH/V3_marsapa_KK_v1.zip
※Please make a backup of your device before installing or updating ROM
Hello, my phone has lcd driver IC: 1-lg_hx8394_vdo, will this rom work whith this lcd driver??? thanks…
Hello marsapa.
I do all the procedure and success installing the rom. When i start it i go to mobileuncle tools and do a IMEI restore and reboot the phone. I put the SIM PIN and when starts i have a error (sorry, the procees com.android.phone as been stopped) and dont have network. What can i do to solve this?
Best Regards.
full wipe and after installed the rom .zip in recovery
Unable to switch to art mode
only with xposed disable
i had official KK rom with twrp from wilsey, after that i flash from recovery this rom, all seems ok, gps not tested yet
This is about art? I had to remove xposed and gravity without activation. No result.
Xposed installer and open framework in prizes please remove after reboot go to settings / info phone prizes several times to turn on buil options developer, once activated go to settings / developer options and changes from Dalvik to Article
I'd to try everything. In result to enable art mode after flashing nesessary first to enable exposed and after this disable. After this operation mode able to switch.
Is there anyone with activated ART? Can you describe how to activate it?
New trouble. Hangouts returns error when I’m trying to make video conference call.
I’m wrong. All OK.
I have installed Marsapa rom V5 4.2.2. Can i install Marsapa KK V1 with CWM? The Flasher Tool not works (driver problems)?
no, only sp flash toll
Looks awsome!!… but i have a doutb, can i install your rom on a 850mhz V3?
yes, i have v3 with 850
With tsunami my gps was very good, but now with this rom i can´t get any sat…What can i do??? Thanks for this Rom…
change your gps.conf with your country with faster gps