- Title: STAR HD5000
- Listed: March, 2014
- Last modified: 03/27/2014 3:15 am
- Version: ROM Android 4.2.2
You must be logged for ROM download.
31412 total views, 9 today
102 Total favorites
Member Info
DESCRIPTION
ROM Phone STAR HD5000– ROM Android 4.2.2
Update ROM STAR HD5000 Version: V11.140313 – vh085_w_emmc_jhgg_v5 – G-WET-FULL-JB5.W1337
————————————————————————————————————————————————
Official ROM STAR HD5000 Version: V10.140218 – vh085_w_emmc_jhgg_v5 – G-WET-FULL-JB5.W1337
Gapps include – No Rooted
Language support: Multilang
Install ROM :
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6582_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
※Please make a backup of your device before installing or updating ROM
Thx Dimmer, I will give it try. Yesterday I succesfully did the EBR-jive on a tengda Z2, now instead of 1G I've got 4G, but I used a little utility named EBRtweak from ChinePhoneArena which works great as it calculates the new EBR's (no copying from others like meteos does). I will check your modified EBR's to see if there's any difference with the ones created by EBRtweak, that'll give us an idea if there's any MB lost somewhere. Thx for the recoveries, although I've seen that CWM can be created automatically by DT (which is true as I also did on the Z2).
I've done what it says, every step, install the drivers for the phone and in the end nothing flash tools will not start nothing. What should I do? Help please
Hello, yesterday I flashed this rom and it goes good. I haven't any problem with V9, but whe I was cleaning odex files with lucky patcher it reebot alone, but when it reebooted it doesn't boot, and I done full wipes. Then I intalled the V11 (it was a bit difficult, I had to put 'download' not 'firmware' and then it was flashed.
Now all is correct, no problems and I think that it goes better than before, no lags.
Sorry for my bad english, I'm from Spain
Hi!! I have a problem. when I load the scatter file, a error appears "Error: Initializing scatter file failed. Please check the name of scatter file which you load is legal."
Anyone know how can I fix it??
thanks!!
Try a different version of flashtool, this error comes from a different version scatter file. Depending on its structure you should use v.3.13xx or v.5.13xx
ok thanks, Now I can use the keyboard while i'm calling. I gonna try the phone and if I find something wrong I'll tell you.
Thanks!!
hello my magnetic field sensor is stuck to 1144μT and does not change. compass is stuck too. does anyone knows how can i fix that. sensor test says that sensor works fine. rom is v11. thanks
Hello, myne also. I think that it doesn't work, not for the rom, because I have tried miui ando color os and it also doesn't work.
I followed the steps but now I only Chinese
does not work anymore the camera always black screen.
solutions?
help me!
my hd5000 device is stock in hardbrick boot loop! even when iconnet it to flashtool without battery it still can connect to the computermore than 30 seconds, i treid to put cwm and it lead me to hardbrick, what shuld i do??
thanks evreybody
am in same boat..Bricked..Kindly assist anyone..Most likelly a preloader brick. Sucessfully flashes but simply wont boot…