MIUI8 6.6.30 | [Custom] 07/02/2016 on Needrom

499

Title: MIUI8 6.6.30
Listed: August, 2015
Last modified: 07/02/2016 1:20 pm
Version: 4.4.2

You must be logged for ROM download.

Overall Rating : ★★★★★ 53

65915 total views, 4 today

41 Total favorites

CUSTOM

Author ad Member Info

Listed by: Vell
Member Since: 08/16/2014

DESCRIPTION

Project is closet!
Dave will continue to the next topic

Be careful when selecting the firmware version. set of languages interface is different!
See the "Language_included_in_MIUIv7:" spoiler!

Preface:
   I present to you port MIUI 7 with phone Xiaomi RedRice (HM2013023) for phones ZOPO C2/ZP980, C3, C7/990. Installation is using Aroma Installer. Multilingual build by xiaomi.eu team
   Firmware need an extended system partition 1Gb.
   Recomended recovery – TWRP 2.8.0.0 for C2/980, C3 for C7/990

Attention!
In all firmware when switching between HD and FHD mode after installing and running the firmware is not to panic, that the entire screen crooked, just reboot again.

How_i_make_it	Select Show

Language_included_in_MIUIv7:	Select Show
miui.com team Chinese English miui.su team Belarusian Bulgarian Catalan Chinese Croatian Dutch English French Italian Korean Portuguese Romanian Russian Serbian Spanish Ukrainian miuipro.ru team Belarusian Chinese Deutsch English Russian Ukrainian multirom.me team Chinese English Russian Ukrainian

Language_included_in_MIUIv7:

Select Show

Language_included_in_MIUIv8:	Select Show
miui.su team Chinese English Russian Ukrainian multirom.me team Chinese English Deutsch Lithuanian Russian Ukrainian

Known_issues_when_run_on_ZOPO_phones:	Select Show
– You can't OTA upgrade firmware! You download firmware for Xiaomi phone, and we have ZOPO. – 3G Internet only works on the first (small) SIM card. ~~- Very strongly lags the built-in gallery (problem inherited from Xiaomi Red Rice).~~ fixed since 6.3.10 (v37) – Regardless of the amount of RAM in the properties shows 1Gb, but uses all available RAM. – ART does not work properly on this firmware. – Bluetooth not works with some devices – In HD mode blur in the notification bar is shifted (and if you take a screenshot, it's OK) – In all firmware when switching between HD and FHD mode after installing and running the firmware is not to panic, that the entire screen crooked, just reboot again. – If you have a crashes in the first initialization, try to get first initialization of the English language, and then in the settings, select your own language. – If you do not activate Mi account, try to activation of the English language, and then in the settings, select your own language.

Known_issues_when_run_on_ZOPO_phones:

Select Show

Helpful_information	Select Show
Getting root rights Run the program requires root rights and close it. Go to the program security -> permission -> root access. There you will see all the programs that have ever asked for root. Conversely relevant programs tap slider and agree with all the warnings. Restart your program and it gets root right. Additional software is not required! For those who have in applications like Viber, WhatsApp, VK… messages arrive only after turning on the screen. Go to Settings -> Additional settings -> Battery -> Manage apps battery usage -> disable! or uncheck needed apps. Apps must be added to the startup. Program Security -> Permissions -> Autostart. How to save the photos on internal SD card Starting with version 5.10.15 in the camera settings there was an option where you can select where to save pictures. If option "save to external memory" is on will be saved to the external SD card, and off on the inside. If calendar is not synchronized with Google Delete the Google Calendar app, sync calendar in settings, install Google Calendar from the playmarket, or not to use it. To enter in recovery you need: Turn off the phone Connect the phone to a charger Press both "volume+" and "on" If you set brigness at minimum and screen is off simultaneously press the menu button and volume up

Helpful_information

Select Show

Special_thanks:	Select Show
MIUI official developer team for the excellent firmware. Team MultiROM.me, xiaomi.eu, miui.su and MiuiPro.ru for translations. Amarullz for the excellent app: Aroma Installer. paolothlw8 for global opportunity just to install firmware on Android 4.4 KitKat. mSH for compiled the kernel source, with the corrected settings for the proximity sensor. dreamer7 for compiled the kernel source, with a lot of tweaks. Ancifer for MIUI ports from Multirom.me, I picked at it and was able to reproduce them and that gave information about the principle repacking of boot.img. SergeyProl for config`s template for Aroma (got with him ModifyRom). andrey_artphoto for a mod to disable the sound when a USB is connected. Dark Star for translation English Installation. mihei78 for HD mode. Dave@NeedRom for their help in support in the English language. mc1968, francodag for donation Creators, Administrators, Moderators, Curators forums china-iphone.ru and 4pda.ru for creating and maintaining a human-readable form of the above forums. All forum users who gave advice.

Special_thanks:

Select Show

Kernel_modification_description	Select Show
Important!: All kernels taken from boot paolothlw8, mSH and dreamer7. For C3 is physically no modifications proximity sensors and rotation sensor, with any choice of settings of the sensors will be installed the default kernel. In the name of kernel modifications present 5 unit: 1. The author of the kernel build 1.1. P - paolothlw8, The Italian master ,building for the first kernels Android 4.4 KitKat. Present all possible modifications. 1.2. M – mSH, Magician with china-iphone.ru forums, make us a kernels with a correct a proximity sensor (ALSPS). There are no modification: Alt and HD. 1.2. D - dreamer7, Developer with china-iphone.ru forums, make a kernels with a lot of tweaks. Present all possible modifications. 2. Phone model: 2.1. C2 – ZOPO C2 or ZOPO ZP980. 2.2. C3 – ZOPO C3. 2.3. C7 – ZOPO C7 or ZOPO ZP990. 3. Modification of the rotation sensor: 3.1. A – Default setting. 3.2. B – Should be selected if the A modification in landscape phone position – picture flipped upside down. 4. Modification of the proximity sensor: 4.1. Norm – Default setting. 4.2. ALSPS – Reconfigured sensor Norm respected mSH, to choose if Norm does bad work, but it works. 4.3. Alt – Alternative sensor, if selected Norm or ALSPS does not work just do. 5. Screen resolution: 5.1. FHD – Full HD (1280×1920) – phone screen native resolution. 5.2. HD – HD Ready (720×1280) – donor rom native resolution (reduce memory consuming, accelerate 3D application). Kernels info: dreamer7 kernel build with a few advanced features: - VM Dirty ratio tweaks - Added frandom driver - Faster NOATIME and NODIRATIME mounting flags - Asynchronous I/O latency to a solid-state disk greatly increased - Compile vfp with neon - Random: Entropy tweaks - CPU governor added – ZZMOOVE (Default) - New IO Schedulers added – ROW, ZEN, SIO (Default SIO – 1024) - Intelli_plug driver (by @faux123) – An interesting thing which is now engaged in enabling and disabling cores (support profiles and some settings), also allows you to set the frequency in offscreen mode (754 instead of 1209 exhibited in the standard) - Optimized ARM RWSEM algorithm(by @faux123) - added multi core saving mode - Sweep2Wake, Sweep2Sleep – disabled at the kernel level - LZ4 - F2FS support (yet in fact, it is necessary to build the kernel for recovery to install the system on this FS) - O3 optimization when assembling + other optimizations - support for workqueue power-efficient mode - implement LoUIS API for cache maintenance ops - update cpu_suspend code to use cache LoUIS operations - shorten freezer sleep time using exponential backoff - wireless: Increase scan entry expiration to fit new scan time - flush L1 cache in cpu_die - Bluetooth: Fix SSP acceptor just-works confirmation without MITM - Bluetooth: fix possible info leak in bt_sock_recvmsg() - various fixes in processing workqueue - ALSA: pcm: fix fifo_size frame calculation - fixes in the TCP subsystem - new cpu governors: [pegasusq], intelliactive, sakuractive, nightmare, interactivex, lulzactiveq, smartassV2 - slightly corrected the intelliplug settings and a lot of other patches … Recommended application to configure the kernel features – Kernel Adiutor

Kernel_modification_description

Select Show

Important!:
All kernels taken from boot paolothlw8, mSH and dreamer7.
For C3 is physically no modifications proximity sensors and rotation sensor, with any choice of settings of the sensors will be installed the default kernel.

In the name of kernel modifications present 5 unit:
1. The author of the kernel build
    1.1. P - paolothlw8, The Italian master ,building for the first kernels Android 4.4 KitKat. Present all possible modifications.
    1.2. M – mSH, Magician with china-iphone.ru forums, make us a kernels with a correct a proximity sensor (ALSPS). There are no modification: Alt and HD.
    1.2. D - dreamer7, Developer with china-iphone.ru forums, make a kernels with a lot of tweaks. Present all possible modifications.
2. Phone model:
2.1. C2 – ZOPO C2 or ZOPO ZP980.
    2.2. C3 – ZOPO C3.
    2.3. C7 – ZOPO C7 or ZOPO ZP990.
3. Modification of the rotation sensor:
    3.1. A – Default setting.
    3.2. B – Should be selected if the A modification in landscape phone position – picture flipped upside down.
4. Modification of the proximity sensor:
4.1. Norm – Default setting.
    4.2. ALSPS – Reconfigured sensor Norm respected mSH, to choose if Norm does bad work, but it works.
    4.3. Alt – Alternative sensor, if selected Norm or ALSPS does not work just do.
5. Screen resolution:
5.1. FHD – Full HD (1280×1920) – phone screen native resolution.
    5.2. HD – HD Ready (720×1280) – donor rom native resolution (reduce memory consuming, accelerate 3D application).

Kernels info:
dreamer7 kernel build with a few advanced features:
- VM Dirty ratio tweaks
- Added frandom driver
- Faster NOATIME and NODIRATIME mounting flags
- Asynchronous I/O latency to a solid-state disk greatly increased
- Compile vfp with neon
- Random: Entropy tweaks
- CPU governor added – ZZMOOVE (Default)
- New IO Schedulers added – ROW, ZEN, SIO (Default SIO – 1024)
- Intelli_plug driver (by @faux123) – An interesting thing which is now engaged in enabling and disabling cores (support profiles and some settings), also allows you to set the frequency in offscreen mode (754 instead of 1209 exhibited in the standard)
- Optimized ARM RWSEM algorithm(by @faux123)
- added multi core saving mode
- Sweep2Wake, Sweep2Sleep – disabled at the kernel level
- LZ4
- F2FS support (yet in fact, it is necessary to build the kernel for recovery to install the system on this FS)
- O3 optimization when assembling + other optimizations
- support for workqueue power-efficient mode
- implement LoUIS API for cache maintenance ops
- update cpu_suspend code to use cache LoUIS operations
- shorten freezer sleep time using exponential backoff
- wireless: Increase scan entry expiration to fit new scan time
- flush L1 cache in cpu_die
- Bluetooth: Fix SSP acceptor just-works confirmation without MITM
- Bluetooth: fix possible info leak in bt_sock_recvmsg()
- various fixes in processing workqueue
- ALSA: pcm: fix fifo_size frame calculation
- fixes in the TCP subsystem
- new cpu governors: [pegasusq], intelliactive, sakuractive, nightmare, interactivex, lulzactiveq, smartassV2
- slightly corrected the intelliplug settings
and a lot of other patches …

Recommended application to configure the kernel features – Kernel Adiutor

Full changelog

Changelog:	Select Show
03.07.2016 v51 [U] Base firmware changed to 6.6.30 27.06.2016 v50 [U] Base firmware changed to 6.6.23 [U] Update kernels by dreamer7 up to v3.1 version 18.06.2016 v49 [U] Base firmware changed to 6.6.16 [U] Open Gapps update to pico-20160618 [U] App4pda update to version 5.0 beta 11 [U] Amazon Appstore update to version 20.0000.912.1C_650000010 [+] Add MIUI 8 style boot animation 29.05.2016 v48 [U] Base firmware changed to 6.5.26 22.05.2016 v47 [U] Base firmware changed to 6.5.19 21.05.2016 v46 [U] Base firmware changed to 6.5.12 [U] Open Gapps update to pico-20160521 15.05.2016 v45 [U] Base firmware changed to 6.5.5 02.05.2016 v44 [U] Base firmware changed to 6.4.28 [U] Open Gapps update to pico-20160501 23.04.2016 v43 [U] Base firmware changed to 6.4.21 [U] Open Gapps update to pico-20160423 16.04.2016 v42 [U] Base firmware changed to 6.4.14 [U] Open Gapps update to pico-20160416 10.04.2016 v41 [U] Base firmware changed to 6.4.7 03.04.2016 v40 [U] Base firmware changed to 6.3.31 [U] Open Gapps update to pico-20160403 [F] Fix Bluetooth 31.03.2016 v39 [U] Base firmware changed to 6.3.24 [F] Fix Bluetooth 20.03.2016 v38 [U] Base firmware changed to 6.3.17 [U] Open Gapps update to 20160318 15.03.2016 v37 [U] Base firmware changed to 6.3.10 08.03.2016 v36 [U] Base firmware changed to 6.3.3 29.02.2016 v35 [U] Base firmware changed to 6.2.25 [+] Kernel Adiutor program added [U] Update kernels by dreamer7 up to v3 version [?] Fix Bluetooth connection with dreamer7 kernels 26.02.2016 v34.2 [+] Kernel Adiutor program added [U] Update kernels by dreamer7 up to v3 version [?] Fix Bluetooth connection with dreamer7 kernels [?] Fix show RAM size [F] Fix Theme manager 20.02.2016 v34.1 [+] Added new kernels by dreamer7 20.02.2016 v34 [U] Base firmware changed to 6.2.18 [?] Attempt to repair the Bluetooth (for file transfer you must first establish a connection) [F] fixed bug with any wired headset to answer the call or tap it normally, not breaking multimedia functions. Thank you dreamer7 [U] Mobile Uncle Tools updated to version 20160202 final 30.01.2016 v33 [U] Base firmware changed to 6.1.28 23.01.2016 v32 [U] Base firmware changed to 6.1.21 [F] Fix ADB connection 16.01.2016 v31 [U] Base firmware changed to 6.1.14 [O] Some changes in the installation menu [-] ViPER4android deleted 08.01.2016 v30 [U] Base firmware changed to 6.1.7 [O] Some changes in the installation menu 03.01.2016 v29 [U] Base firmware changed to 5.12.31 [+] Added kernels by dreamer7 [O] It changed the way replacement of swap SD card, now works with any kernel [F] A temporary solution to switch between HD and FHD mode (requires 2 restarting the phone) [O] Optimized install menu 25.12.2015 v28 [U] Base firmware changed to 5.12.24 [+] Added minimalistic bootanimation MIUIv5 style [+] Added ViPER4android 2.3.4.0 [F] Fixed the names of some operators 18.12.2015 v27 [U] Base firmware changed to 5.12.18 [+] Added support for HD screen resolution for all kernels except ALSPS 12.12.2015 v26 [U] Base firmware changed 5.12.10 [O] optimized work init.d 05.12.2015 v25 [U] Base firmware changed to 5.12.3 28.11.2015 v24 [U] Base firmware changed to 5.11.26 21.11.2015 v23 [U] Base firmware changed to 5.11.19 [+] Added kernel with swaped SD memory for C2/980 14.11.2015 v22 [U] Base firmware changed to 5.11.12 08.11.2015 v21 [U] Base firmware changed to 5.11.5 04.11.2015 v20.1 [U] Base firmware changed to 5.11.1 31.10.2015 v20 [U] Base firmware changed to 5.10.29 [U] Update Amazon Appstore up to v19.0000.904.1C_649000010 23.10.2015 v19 [U] Base firmware changed to 5.10.22 [-] SSD-0 kernels removed [+] Add extensive icon pack in MIUI style 16.10.2015 v18 [U] Base firmware changed to MIUI v7 5.10.15. 09.10.2015 v17 [U] Base firmware changed to MIUI v7 5.10.8. 26.09.2015 v16 [U] Base firmware changed to MIUI v7 5.9.24. [U] Base firmware changed to MIUI v7 5.9.26. (Fixed SIM card PIN issue.) 19.09.2015 v15 [U] Base firmware changed to MIUI v7 5.9.17. [+] Added Paolo`s kernel. 12.09.2015 v14 [U] Base firmware changed to MIUI v7 5.9.10. 05.09.2015 v13 [U] Base firmware changed to MIUI v7 5.9.1. [+] Added alternative sound when you connect USB 29.08.2015 v12 [U] Base firmware changed to MIUI v7 5.8.27. [U] app4pda updated to ver 5.0 beta 8 [+] Add selection of boot animations. [+] Add MIUI 7 style boot animation 24.08.2015 v11multi [U] Base firmware changed to 5.8.20 Xiaomi.eu (multilanguage). MIUI 7 16.08.2015 v10multi [?] 5.8.13 skipped release by Xiaomi.eu (multilanguage). MIUI 7 12.08.2015 v09multi [U] Base firmware changed to 5.8.6 Xiaomi.eu (multilanguage). 08.08.2015 v09 [U] Base firmware changed to 5.8.6 Multirom. [U] Geomagnetic sensor is working now. 04.08.2015 v08 [U] Base firmware changed to 5.7.31 Multirom. [U] Amazon Appstore updated ver 17.0001.894.0C_647000110 30.07.2015 v07 [+] Added English translation on Aroma Installer. 28.07.2015 v06 [+] Added kernel for alternative proximity sensor. [+] Added selection of boot animations. [U] Updated busybox [F] fixed init.d [O] Now disable s2w use to init.d (works on alt kernel. [O] Quantity of kernel modifications was reduced without loss of functionality. 26.07.2015 v05 [F] fixed bug of setting app. [+] In the pre-installed apps added the Amazon Appstore. 26.07.2015 v04 [U] Base firmware, changed to 5.7.26 Multirom. 26.07.2015 v03 [U] Base firmware, changed to 5.7.23 Multirom. 20.07.2015 v02 [+] Added a modification to disable the annoying sound when you connect USB. 20.07.2015 v01 [O] Application app4pda, mobile Uncle tools is put in the menu. 20.07.2015 [+] Pilot firmware

Changelog:

Select Show

03.07.2016 v51
[U] Base firmware changed to 6.6.30

27.06.2016 v50
[U] Base firmware changed to 6.6.23
[U] Update kernels by dreamer7 up to v3.1 version

18.06.2016 v49
[U] Base firmware changed to 6.6.16
[U] Open Gapps update to pico-20160618
[U] App4pda update to version 5.0 beta 11
[U] Amazon Appstore update to version 20.0000.912.1C_650000010
[+] Add MIUI 8 style boot animation

29.05.2016 v48
[U] Base firmware changed to 6.5.26

22.05.2016 v47
[U] Base firmware changed to 6.5.19

21.05.2016 v46
[U] Base firmware changed to 6.5.12
[U] Open Gapps update to pico-20160521

15.05.2016 v45
[U] Base firmware changed to 6.5.5

02.05.2016 v44
[U] Base firmware changed to 6.4.28
[U] Open Gapps update to pico-20160501

23.04.2016 v43
[U] Base firmware changed to 6.4.21
[U] Open Gapps update to pico-20160423

16.04.2016 v42
[U] Base firmware changed to 6.4.14
[U] Open Gapps update to pico-20160416

10.04.2016 v41
[U] Base firmware changed to 6.4.7

03.04.2016 v40
    [U] Base firmware changed to 6.3.31
    [U] Open Gapps update to pico-20160403
    [F] Fix Bluetooth

31.03.2016 v39
[U] Base firmware changed to 6.3.24
[F] Fix Bluetooth

20.03.2016 v38
[U] Base firmware changed to 6.3.17
[U] Open Gapps update to 20160318

15.03.2016 v37
[U] Base firmware changed to 6.3.10

08.03.2016 v36
[U] Base firmware changed to 6.3.3

29.02.2016 v35
    [U] Base firmware changed to 6.2.25
    [+] Kernel Adiutor program added
    [U] Update kernels by dreamer7 up to v3 version
    [?] Fix Bluetooth connection with dreamer7 kernels

26.02.2016 v34.2
    [+] Kernel Adiutor program added
    [U] Update kernels by dreamer7 up to v3 version
    [?] Fix Bluetooth connection with dreamer7 kernels
    [?] Fix show RAM size
    [F] Fix Theme manager

20.02.2016 v34.1
[+] Added new kernels by dreamer7

20.02.2016 v34
    [U] Base firmware changed to 6.2.18
    [?] Attempt to repair the Bluetooth (for file transfer you must first establish a connection)
    [F] fixed bug with any wired headset to answer the call or tap it normally, not breaking multimedia functions. Thank you dreamer7
    [U] Mobile Uncle Tools updated to version 20160202 final

30.01.2016 v33
[U] Base firmware changed to 6.1.28

23.01.2016 v32
[U] Base firmware changed to 6.1.21
[F] Fix ADB connection

16.01.2016 v31
    [U] Base firmware changed to 6.1.14
    [O] Some changes in the installation menu
    [-] ViPER4android deleted

08.01.2016 v30
[U] Base firmware changed to 6.1.7
[O] Some changes in the installation menu

03.01.2016 v29
    [U] Base firmware changed to 5.12.31
    [+] Added kernels by dreamer7
    [O] It changed the way replacement of swap SD card, now works with any kernel
    [F] A temporary solution to switch between HD and FHD mode (requires 2 restarting the phone)
    [O] Optimized install menu

25.12.2015 v28
    [U] Base firmware changed to 5.12.24
    [+] Added minimalistic bootanimation MIUIv5 style
    [+] Added ViPER4android 2.3.4.0
    [F] Fixed the names of some operators

18.12.2015 v27
[U] Base firmware changed to 5.12.18
[+] Added support for HD screen resolution for all kernels except ALSPS

12.12.2015 v26
[U] Base firmware changed 5.12.10
[O] optimized work init.d

05.12.2015 v25
[U] Base firmware changed to 5.12.3

28.11.2015 v24
[U] Base firmware changed to 5.11.26

21.11.2015 v23
[U] Base firmware changed to 5.11.19
[+] Added kernel with swaped SD memory for C2/980

14.11.2015 v22
[U] Base firmware changed to 5.11.12

08.11.2015 v21
[U] Base firmware changed to 5.11.5

04.11.2015 v20.1
[U] Base firmware changed to 5.11.1

31.10.2015 v20
[U] Base firmware changed to 5.10.29
[U] Update Amazon Appstore up to v19.0000.904.1C_649000010

23.10.2015 v19
    [U] Base firmware changed to 5.10.22
    [-] SSD-0 kernels removed
    [+] Add extensive icon pack in MIUI style

16.10.2015 v18
[U] Base firmware changed to MIUI v7 5.10.15.

09.10.2015 v17
[U] Base firmware changed to MIUI v7 5.10.8.

26.09.2015 v16
[U] Base firmware changed to MIUI v7 5.9.24.
[U] Base firmware changed to MIUI v7 5.9.26. (Fixed SIM card PIN issue.)

19.09.2015 v15
[U] Base firmware changed to MIUI v7 5.9.17.
[+] Added Paolo`s kernel.

12.09.2015 v14
[U] Base firmware changed to MIUI v7 5.9.10.

05.09.2015 v13
[U] Base firmware changed to MIUI v7 5.9.1.
[+] Added alternative sound when you connect USB

29.08.2015 v12
    [U] Base firmware changed to MIUI v7 5.8.27.
    [U] app4pda updated to ver 5.0 beta 8
    [+] Add selection of boot animations.
    [+] Add MIUI 7 style boot animation

24.08.2015 v11multi
[U] Base firmware changed to 5.8.20 Xiaomi.eu (multilanguage). MIUI 7

16.08.2015 v10multi
    [?] 5.8.13 skipped release by Xiaomi.eu (multilanguage). MIUI 7

12.08.2015 v09multi
    [U] Base firmware changed to 5.8.6 Xiaomi.eu (multilanguage).

08.08.2015 v09
    [U] Base firmware changed to 5.8.6 Multirom.
    [U] Geomagnetic sensor is working now.

04.08.2015 v08
    [U] Base firmware changed to 5.7.31 Multirom.
    [U] Amazon Appstore updated ver 17.0001.894.0C_647000110

30.07.2015 v07
[+] Added English translation on Aroma Installer.

28.07.2015 v06
    [+] Added kernel for alternative proximity sensor.
    [+] Added selection of boot animations.
    [U] Updated busybox
    [F] fixed init.d
    [O] Now disable s2w use to init.d (works on alt kernel.
    [O] Quantity of kernel modifications was reduced without loss of functionality.

26.07.2015 v05
[F] fixed bug of setting app.
[+] In the pre-installed apps added the Amazon Appstore.

26.07.2015 v04
[U] Base firmware, changed to 5.7.26 Multirom.

26.07.2015 v03
[U] Base firmware, changed to 5.7.23 Multirom.

20.07.2015 v02
[+] Added a modification to disable the annoying sound when you connect USB.

20.07.2015 v01
[O] Application app4pda, mobile Uncle tools is put in the menu.

20.07.2015
[+] Pilot firmware

Terms_of_use_and_distribution:	Select Show
This firmware is provided "as is". The author disclaims all related warranties, including all implied warranties of merchantability and compliance with the intended use. The author shall not be liable for any special, direct, indirect or induced by damages, and any damages for loss of use, loss of data or profit, under the action of the obligations, negligence or other malicious actions that occur without or in connection with the use or performance of this software. If you want to share with friends this file, please post a link to this page, not the file itself.

Terms_of_use_and_distribution:

Select Show

How_to_extend_the_system_partition	Select Show
Increasing the System partition to 1.0 Gb with simultaneous increase of the Data partition. Suitable for those who have the native phone memory partition. Available options: System1Gb-DataStock.zip —- increases the /system partition up to 1GB, /data partition to 1.5GB. System1Gb-Data2.5Gb.zip —- increases the /system partition up to 1GB, /data partition up to 2.5GB. System1Gb-Data5.0Gb.zip —- increases the /system partition up to 1GB, /data partition up to 5GB. System1Gb-Data10.0Gb.zip – increases the /system partition up to 1GB, /data partition up to 10GB. Important: 1. There will be formatted partitions System, Cache, Data and Emmc (internal SD) – save data if necessary! All data in internal Sd will be destroyed! 2. If you want to return the native partitions the install through recoveri SystemStock-DataStock.zip (by analogy with System1Gb-DataStock.zip) Attention! Be careful when performing the instructions! Thoughtfully read and not to deviate from the above course of action. Pay particular attention to the strict implementation of the right step 3. For any wrong-doing will be a brick! Instructions: First, make a backup of the existing firmware and/or copy to an external SD card file with the new firmware, which will be installed after repartition. After performing the following steps will have a mobile repartition phone WITHOUT SYSTEM, it is necessary to reinstall or restore from backup! 1. Take the patch from the folder "Patches for Recovery", for example, System 1Gb-DataStock.zip, copy it to the SDcard (extSDcard – a removable SD flash drive and nothing else!). 2. Install it through Recovery (I recommend CWM 6.0.4.4). 3. Reboot again in recoveri and format partitions System, Cache, Data. 4. Connect your phone to your PC, go to the Recovery section mount, and mount intSDcard – internal memory as a USB-drive to your PC. And with the PC format the intSDcard – internal memory in fat32 (cluster size you can leave the standard). 5. Repartition passed. Restoring from a backup you firmware or install the new. Attention!!! 1. Do not repartition the memory in other ways, before return to the native Memory partition – get a brick. 2. Whatever you do – do at your own risk. 3. The archives with patches has detailed instructions on rusiian language. C2 ROM-4GB System_1.0gb.7z This patch is only for ZOPO C2 with 4GB ROM !!! System 1Gb-Data Gb.7z This patch for ZOPO C2 / ZP980 / ZP990 with 16 / 32GB ROM !!! This recovery only for repartition!!! Recomended recovery for C2/980, C3 Recomended recovery for C7/990 Original information with the repartition files Original post with recovery for C2/980, C3 Original post with recovery for C7/990 To install any firmware 4.4 Kitkat you must use the TWRP 2.7.1.0 or 2.8.0.0 TWRP 2.8.0.0 – is recomended Attention!!! All data on internal SD will be lost!!! This patches are installed only on the native memory partition! Recomended recovery – TWRP 2.8.0.0 = for С2/980, C3 = = for C7/990 = Repartition files for 16/32Gb phone version: System-1Gb Data-Stock – System partition is 1Gb, Data partition is default. System-1Gb Data-2,5Gb – System partition is 1Gb, Data partition is 2,5Gb. System-1Gb Data-5Gb – System partition is 1Gb, Data partition is 5Gb. (Recomended) System-1Gb Data-10Gb – System partition is 1Gb, Data partition is 10Gb. System-Stock Data-Stock – Default partition set. Repartition files for 4Gb phone version: C2-4Gb System-1Gb – System partition is 1Gb, Data partition is default. C2-4Gb System-Stock – Default partition set. Instruction: 1. Copy rom into your external sdcard. 2. Copy zip file with the partition type into your external sdcard (for 32Gb version recomended System1Gb-Data5.0Gb, for 4Gb version – ONLY C2_ROM-4GB_System_1.0gb). 3. Wipe -> advanced: dalvik cache, cache, data, android secure, system. 4. Reboot -> Recovery. 5. Install zip file with the partition type. 6. Reboot -> Recovery. 7. Wipe -> advanced: dalvik cache, cache, data, emmc, android secure, system. 8. Reboot -> Recovery. 9. Install rom with needed options. 10. Reboot -> System. If you have an error: error executing updater binary in zip when installing these patches, it means you already made the repartition other method. In order to apply these patches, should be return to the native partition. You can do this by using SPFlashTool3 by installing the stock firmware use button Firmware Upgrade.

How_to_extend_the_system_partition

Select Show

Increasing the System partition to 1.0 Gb with simultaneous increase of the Data partition.
Suitable for those who have the native phone memory partition.

Available options:
System1Gb-DataStock.zip —- increases the /system partition up to 1GB, /data partition to 1.5GB.
System1Gb-Data2.5Gb.zip —- increases the /system partition up to 1GB, /data partition up to 2.5GB.
System1Gb-Data5.0Gb.zip —- increases the /system partition up to 1GB, /data partition up to 5GB.
System1Gb-Data10.0Gb.zip – increases the /system partition up to 1GB, /data partition up to 10GB.

Important:
1. There will be formatted partitions System, Cache, Data and Emmc (internal SD) – save data if necessary! All data in internal Sd will be destroyed!
2. If you want to return the native partitions the install through recoveri SystemStock-DataStock.zip (by analogy with System1Gb-DataStock.zip)

Attention!
Be careful when performing the instructions! Thoughtfully read and not to deviate from the above course of action. Pay particular attention to the strict implementation of the right step 3. For any wrong-doing will be a brick!

Instructions:
First, make a backup of the existing firmware and/or copy to an external SD card file with the new firmware, which will be installed after repartition. After performing the following steps will have a mobile repartition phone WITHOUT SYSTEM, it is necessary to reinstall or restore from backup!

1. Take the patch from the folder "Patches for Recovery", for example, System 1Gb-DataStock.zip, copy it to the SDcard (extSDcard – a removable SD flash drive and nothing else!).
2. Install it through Recovery (I recommend CWM 6.0.4.4).
3. Reboot again in recoveri and format partitions System, Cache, Data.
4. Connect your phone to your PC, go to the Recovery section mount, and mount intSDcard – internal memory as a USB-drive to your PC.
And with the PC format the intSDcard – internal memory in fat32 (cluster size you can leave the standard).
5. Repartition passed.
Restoring from a backup you firmware or install the new.

Attention!!!
1. Do not repartition the memory in other ways, before return to the native Memory partition – get a brick.
2. Whatever you do – do at your own risk.
3. The archives with patches has detailed instructions on rusiian language.

C2 ROM-4GB System_1.0gb.7z
This patch is only for ZOPO C2 with 4GB ROM !!!

System 1Gb-Data Gb.7z
This patch for ZOPO C2 / ZP980 / ZP990 with 16 / 32GB ROM !!!

This recovery only for repartition!!!
Recomended recovery for C2/980, C3
Recomended recovery for C7/990

Original information with the repartition files
Original post with recovery for C2/980, C3
Original post with recovery for C7/990

To install any firmware 4.4 Kitkat you must use the TWRP 2.7.1.0 or 2.8.0.0
TWRP 2.8.0.0 – is recomended

Attention!!! All data on internal SD will be lost!!!
This patches are installed only on the native memory partition!
Recomended recovery – TWRP 2.8.0.0 = for С2/980, C3 = = for C7/990 =
Repartition files for 16/32Gb phone version:
System-1Gb Data-Stock – System partition is 1Gb, Data partition is default.
System-1Gb Data-2,5Gb – System partition is 1Gb, Data partition is 2,5Gb.
System-1Gb Data-5Gb – System partition is 1Gb, Data partition is 5Gb. (Recomended)
System-1Gb Data-10Gb – System partition is 1Gb, Data partition is 10Gb.
System-Stock Data-Stock – Default partition set.
Repartition files for 4Gb phone version:
C2-4Gb System-1Gb – System partition is 1Gb, Data partition is default.
C2-4Gb System-Stock – Default partition set.

Instruction:
    1. Copy rom into your external sdcard.
    2. Copy zip file with the partition type into your external sdcard (for 32Gb version recomended System1Gb-Data5.0Gb, for 4Gb version – ONLY C2_ROM-4GB_System_1.0gb).
    3. Wipe -> advanced: dalvik cache, cache, data, android secure, system.
    4. Reboot -> Recovery.
    5. Install zip file with the partition type.
    6. Reboot -> Recovery.
    7. Wipe -> advanced: dalvik cache, cache, data, emmc, android secure, system.
    8. Reboot -> Recovery.
    9. Install rom with needed options.
10. Reboot -> System.

If you have an error: error executing updater binary in zip when installing these patches, it means you already made the repartition other method.
In order to apply these patches, should be return to the native partition.
You can do this by using SPFlashTool3 by installing the stock firmware use button Firmware Upgrade.

Description of the installation process:
New installation:
    1. Make sure again that you have Extended the System to 1.0 Gb.
    2. Recommended to install Recovery – TWRP 2.8.0.0 = for С2/980, C3 = = for C7/990 =
    3. Make a full backup.
    4. Copy the archive file of the firmware on the internal or external SD card.
    5. In TWRP Recovery do all wipes except flash drives.
    6. Necessarily restart Recovery.
    7. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    8. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.

Update a previous version:
    1. Copy the archive file of the firmware on the internal or external SD card.
    2. Make a full backup.
    3. Necessarily restart Recovery.
    4. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    5. Wipe a Cache / Dalvik cache
    6. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.

※Please make a backup of your device before installing or updating ROM

Responses to “MIUI8 6.6.30”

08/16/2014

Vell on 08/23/2015 @ 9:48 am

5.8.20 from xiaomi.eu when porting turned out with periodic freezes. Release miui v7 deferred

Log in to reply.
03/21/2015

andrewpr on 08/23/2015 @ 6:42 pm

Hola. Como puedo cambiar el tiempo de ejecucion a ART?

Log in to reply.
- 03/21/2015
  
  andrewpr on 08/23/2015 @ 7:05 pm
  
  How i can change the runtime dalvik to ART?
- 08/16/2014
  
  Vell on 08/23/2015 @ 9:09 pm
  
  ART does not work properly on this firmware
08/16/2014

Vell on 08/23/2015 @ 11:30 pm

MIUI 7 released!

In next friday xiaomi.eu promised the German translation

Log in to reply.
- 08/16/2014
  
  Vell on 08/29/2015 @ 9:02 am
  
  Sorry? German language is not support.
07/03/2015

mc1968 on 08/24/2015 @ 4:40 pm

@Vell

…work for me! thanks for sharing

best regards

Log in to reply.
08/25/2013

cengizce on 08/26/2015 @ 7:36 am

video darkness

Log in to reply.
08/25/2013

cengizce on 08/26/2015 @ 7:38 am

and dark photo gallery

Log in to reply.
02/04/2013

cabal_73 on 08/29/2015 @ 8:55 pm

I updated from precedent version 5.7.31 of this ROM to 5.8.20 and works fine.

Thank you!

Log in to reply.
03/30/2013

johnnyar on 08/30/2015 @ 8:16 am

3g works only in small first sim card but first sim is large the second is small. In wich card works 3g because i want this rom, my zopo 980 2/32 small sim is second.

Log in to reply.
- 08/16/2014
  
  Vell on 08/30/2015 @ 10:03 am
  
  you have 3g working on a big SIM card?
  
  https://www.needrom.com/wp-con.....57×500.jpg
08/25/2013

cengizce on 08/31/2015 @ 11:57 am

Please update the structure of the web browser too slow

Log in to reply.
- 08/16/2014
  
  Vell on 08/31/2015 @ 7:15 pm
  
  there is no such
09/27/2014

jlovrek on 08/31/2015 @ 5:06 pm

Car Bluetooth hands free automatically disconnects few seconds after connection…. Maybe because of sharing contacts?

Log in to reply.

DESCRIPTION

Responses to “MIUI8 6.6.30”

Leave a Reply ▲

Leave a Reply
▲