• Title: MIUI8 6.6.30
  • Listed: 07/02/2016 1:20 pm
  • ROM Version: 4.4.2
  • You must be logged for ROM download.


Overall Rating : 53


45552 total views, 5 today

41 Total favorites

  

MIUI8 6.6.30
DesktopFirst run settingsIn call UILockscreenMy MusicPermisionsShutdown menuSIM photo

Author adMember Info

Vell


DESCRIPTION


Project is closet!
Dave will continue to the next topic

Be careful when selecting the firmware version. set of languages interface is different!
See the "Language_included_in_MIUIv7:" spoiler!

Preface:
   I present to you port MIUI 7 with phone Xiaomi RedRice (HM2013023) for phones ZOPO C2/ZP980, C3, C7/990. Installation is using Aroma Installer. Multilingual build by xiaomi.eu team
   Firmware need an extended system partition 1Gb.
   Recomended recovery – TWRP 2.8.0.0 for C2/980, C3 for C7/990

Attention!
In all firmware when switching between HD and FHD mode after installing and running the firmware is not to panic, that the entire screen crooked, just reboot again.

How_i_make_itSelectShow
Language_included_in_MIUIv7:SelectShow
Language_included_in_MIUIv8:SelectShow
Known_issues_when_run_on_ZOPO_phones:SelectShow
Helpful_informationSelectShow
Special_thanks:SelectShow
Kernel_modification_descriptionSelectShow

Full changelog

Changelog:SelectShow
Terms_of_use_and_distribution:SelectShow
How_to_extend_the_system_partitionSelectShow

Description of the installation process:
New installation:
    1. Make sure again that you have Extended the System to 1.0 Gb.
    2. Recommended to install Recovery – TWRP 2.8.0.0 = for С2/980, C3 = = for C7/990 =
    3. Make a full backup.
    4. Copy the archive file of the firmware on the internal or external SD card.
    5. In TWRP Recovery do all wipes except flash drives.
    6. Necessarily restart Recovery.
    7. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    8. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.

Update a previous version:
    1. Copy the archive file of the firmware on the internal or external SD card.
    2. Make a full backup.
    3. Necessarily restart Recovery.
    4. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    5. Wipe a Cache / Dalvik cache
    6. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.



※Please make a backup of your device before installing or updating ROM


Donate with PayPal to Vell


499 Responses to“MIUI8 6.6.30”



  1. Vell




    08/16/2014

    Russian Federation

    MIUI 7 5.9.26 for Redmi 1 WCDMA released.. Fixed SIM card PIN issue..

    wait one hour, make a new port with the fix
  2. Dave@NeedRom




    02/06/2014

    Germany

    Downloading….

  3. Dave@NeedRom




    02/06/2014

    Germany

    Wonderfull. So far everything seems to work. Some minor bug's in the german translation, but we are on them to kill them ;) step by step. THX Vell for the new update.





  4. 07/03/2015

    Italy

    @Vell:

    now your MIUI 7 5.9.26 work fine for me. thank you so much. ciao!

     





  5. 04/27/2015

    Croatia (LOCAL Name: Hrvatska)

    Great job! I'll donate to keep U doing updates.. THX





  6. 09/21/2013

    Greece

    plz tell me what option i need to select for install? I have already extend my partition, i have choose all combination of options but still no strart my phone……i put the official rom and is ok but with your rom nothing and i think is perfect rom…..My zopo is 2/32….

    • Dave@NeedRom




      02/06/2014

      Germany

      Hello Souits,

      I have the same version of the Zopo phone and it works verry well. If u really have expand your system partition, not data!! like this:

      How to make a extended system partition (tnx for mc1968)

      Attention!!! All data on internal SD will be lost!!!

      Recomended recovery – 2.8.0.0 = for С2/980, C3 = = for C7/990 =

      Repartition files = for 16/32Gb version = = only for 4Gb version =

          1. Copy rom into your external sdcard.

          2. Copy zip file with the partition type into your external sdcard (for 32Gb version recomended System1Gb-Data5.0Gb, for 4Gb version –ONLY C2_ROM-4GB_System_1.0gb).

          3. Wipe -> advanced: dalvik cache, cache, data, android secure, system.

          4. Install zip file with the partition type.

          5. Be sure reboot into recovery.

          6. Wipe -> advanced: dalvik cache, cache, data, emmc, android secure, system.

          7. Reboot into recovery.

          8. Install rom with needed options.

          9. Reboot system.

      than everything should be OK. The first start takes about 5-10 Minutes in all. If u follow the above instructions, everything should work and u can enjoy the new MIUIv7 :)

    • Vell




      08/16/2014

      Russian Federation

      C2-A-Norm

  7. Vell




    08/16/2014

    Russian Federation

    I changed the repartition scripts, auto reboot does not occur, follow the instruction in the description.

  8. Vell




    08/16/2014

    Russian Federation

    China's big celebration. This week a firmware update will likely not be.





  9. 11/25/2013

    Italy

    assistance after several tests you unlock more than 50% with this written

    symlink: some symlinks failed

     

    • Vell




      08/16/2014

      Russian Federation

      How to make a extended system partition (tnx for mc1968)
      Attention!!! All data on internal SD will be lost!!!
      Recomended recovery – 2.8.0.0 = for С2/980, C3 = = for C7/990 =
      Repartition files for 16/32Gb phone version:
      System-1Gb Data-Stock – System partition is 1Gb, Data partition is default.
      System-1Gb Data-2,5Gb – System partition is 1Gb, Data partition is 2,5Gb.
      System-1Gb Data-5Gb – System partition is 1Gb, Data partition is 5Gb. (Recomended)
      System-1Gb Data-10Gb – System partition is 1Gb, Data partition is 10Gb.
      System-Stock Data-Stock – Default partition set.
      Repartition files for 4Gb phone version:
      C2-4Gb System-1Gb – System partition is 1Gb, Data partition is default.
      C2-4Gb System-Stock – Default partition set.
      Instruction:
          1. Copy rom into your external sdcard.
          2. Copy zip file with the partition type into your external sdcard (for 32Gb version recomended System1Gb-Data5.0Gb, for 4Gb version – ONLY C2_ROM-4GB_System_1.0gb).
          3. Wipe -> advanced: dalvik cache, cache, data, android secure, system.
          4. Install zip file with the partition type.
          5. Be sure reboot into recovery.
          6. Wipe -> advanced: dalvik cache, cache, data, emmc, android secure, system.
          7. Reboot into recovery.
          8. Install rom with needed options.
          9. Reboot system.





    • 09/13/2014

      Netherlands

      @antoniosalva964

      If you get some symlink failed error, just flash the ROM again. If you still get some symlink error, your extended partition isn't as it suppose to. Check the system partition size. It should be 1009MB. If not flash the repartition files again. Reboot into recovery, check the partitions sizes. If sizes are ok, then install ROM. You shouldn't get the som symlink failes error.

      @ Vell

      It is good to not let the repartition script auto reboot. Maybe this will reduce the boot loops.
      Maybe an idea to put after step 5 to check the partition sizes first before step 6. If sizes aren't correct, let people reflash the repartition files again. This will reduces the questions from people with some simlink failed error.

      After seeing your repartitioning list again, I see I switched steps 5 an 6. So I did the wipe first and then repartitioned. Maybe this caused the boot loops I got.

      Found one more error in the ROM. The wifi MAC-adres changes everytime you reboot the phone. In my case I have to setup my router again to let the phone have internet connection each time I reboot the phone. Major pain. Luckely there is a solution. The problem exist in the WIFI and WIFI_CUSTOM files which are located in \ data \ nvram \ APCFG \ APRDEBed. I have the files to replaces the ones in your ROM to fix this bug. If you give me a way to give the files to you so you can incorporate them into the ROM, that should fix another bug.

      I haven't found any major bugs which annoy me. Great ROM! Keep up the good work :-bd





    • 09/13/2014

      Netherlands

      After rethinking about the WIFI and WIFI_CUSTOM files .. If you incorparate the files into the ROM, everyone using the ROM will get the same MAC-adress. That shouldn't be the case. So bad idea .. Nevermind.





    • 09/13/2014

      Netherlands

      After rethinking about the WIFI and WIFI_CUSTOM files .. If you incorparate the files into the ROM, everyone using the ROM will get the same MAC-adress. That shouldn't be the case. So bad idea .. Nevermind.

      I asked mister Google about a solution to the changing MAC-adress. Do te following. Credits to Roby.Bra from forum.zopomobileshop.com

      1. Download this package http://www.4shared.com/rar/mD2.....2q/Mod_Mac.html
      2. Extract the rar file to a folder on pc

      3. Using a hex editor to edit the file WIFI … from the position hexadecimal 4 to 9 … the value reported at the time that you download is D0.B3.3F.6B.EF.DE …. change it to one of your own staff (if you want to customize it) …

      4. copied to a folder on the phone the two files wifi and wifi custom

      5. Then with a good file manager like "Root Browser" entries in the root of your phone and look for the folder \ data \ nvram \ APCFG \ APRDEB

      6. rename them the two files in 'WIFI_old' and 'WIFI_CUSTOM_old'

      7. Paste the new ones

      6) reboot and do a test with wifi …..

      @Vell

      Maybe an idea to incorporate these files into the ROM and give people the above instruction to customize their own MAC-adress. If not customize then their MAC-adress will be D0.B3.3F.6B.EF.DE

    • Vell




      08/16/2014

      Russian Federation

      No need to invent a bicycle.
      You just had to make a backup while in TWRP
      If you lose your IMEI and MAC, just restore the Nvram partition.





  10. 09/17/2013

    Indonesia

    Hi Vell,

    I got some problem when install extended system partition.

       1. Copy rom into your external sdcard.

        2. Copy zip file with the partition type into your external sdcard (for 32Gb version recomended System1Gb-Data5.0Gb, for 4Gb version –ONLY C2_ROM-4GB_System_1.0gb).

        3. Wipe -> advanced: dalvik cache, cache, data, android secure, system.

        4. Install zip file with the partition type. <- I have message error executing updater binary in zip. what is possible causes when this message error appear? 

    sorry for the trouble. thanks.

    • Vell




      08/16/2014

      Russian Federation

      I checked all the scripts, there should be no errors. Check whether you are doing the instructions.





    • 01/29/2014

      Netherlands

      I have the same message error executing updater binary in zip when installing zip file.

      Please help.

       

       


Leave a Reply

You must be logged in to post a comment.