Welcome, visitor! [ Register | Login

  • Title: MIUI8 6.6.30
  • Listed: August, 2015
  • Last modified: 07/02/2016 1:20 pm
  • Version: 4.4.2
  • You must be logged for ROM download.


Overall Rating : 1 Star2 Star3 Star4 Star5 Star 53


64477 total views, 5 today

41 Total favorites

  

CUSTOM
MIUI8 6.6.30
DesktopFirst run settingsIn call UILockscreenMy MusicPermisionsShutdown menuSIM photo

Author adMember Info


DESCRIPTION


Project is closet!
Dave will continue to the next topic

Be careful when selecting the firmware version. set of languages interface is different!
See the "Language_included_in_MIUIv7:" spoiler!

Preface:
   I present to you port MIUI 7 with phone Xiaomi RedRice (HM2013023) for phones ZOPO C2/ZP980, C3, C7/990. Installation is using Aroma Installer. Multilingual build by xiaomi.eu team
   Firmware need an extended system partition 1Gb.
   Recomended recovery – TWRP 2.8.0.0 for C2/980, C3 for C7/990

Attention!
In all firmware when switching between HD and FHD mode after installing and running the firmware is not to panic, that the entire screen crooked, just reboot again.

How_i_make_itSelectShow
Language_included_in_MIUIv7:SelectShow
Language_included_in_MIUIv8:SelectShow
Known_issues_when_run_on_ZOPO_phones:SelectShow
Helpful_informationSelectShow
Special_thanks:SelectShow
Kernel_modification_descriptionSelectShow

Full changelog

Changelog:SelectShow
Terms_of_use_and_distribution:SelectShow
How_to_extend_the_system_partitionSelectShow

Description of the installation process:
New installation:
    1. Make sure again that you have Extended the System to 1.0 Gb.
    2. Recommended to install Recovery – TWRP 2.8.0.0 = for С2/980, C3 = = for C7/990 =
    3. Make a full backup.
    4. Copy the archive file of the firmware on the internal or external SD card.
    5. In TWRP Recovery do all wipes except flash drives.
    6. Necessarily restart Recovery.
    7. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    8. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.

Update a previous version:
    1. Copy the archive file of the firmware on the internal or external SD card.
    2. Make a full backup.
    3. Necessarily restart Recovery.
    4. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    5. Wipe a Cache / Dalvik cache
    6. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.



※Please make a backup of your device before installing or updating ROM


Responses to “MIUI8 6.6.30”


  1. 09/27/2014
    Croatia

    Sorry, i didnt mean sharing… Syncing contacts with car handsfree…is it.possible to make log to find out what is the reason for disconnecting?

  2. 12/16/2013
    Vietnam

    vui lòng lắp thẻ nhớ trước khi sử dụng máy ảnh.pls fix?

  3. 12/16/2013
    Vietnam

    Insert SD card before using camera
    Pls fix?

    • 08/16/2014
      Russia
      During the installation process, in the parameter of the init function.no_ssd.rc select a SECONDARY_STORAGE /storage/sdcard0. This Function for camera shooting to internal memory.
  4. 12/16/2013
    Vietnam

    Tks.reup rom

  5. 12/16/2013
    Vietnam

    I did everything but i ca’nt root device
    Pls guide

  6. 12/16/2013
    Vietnam

    Not find and not see: Go to the program security -> permission -> root access.

  7. 12/16/2013
    Vietnam

    Tks all.root success

  8. 12/16/2013
    Vietnam

    Tốn pin.pin tụt nhanh.thư viện ảnh rất lag

  9. 02/04/2013
    Italy

    at the end installation of version: 5.9.1__for ZOPO C2/980, C3, C7/990 v13 give me this message: "error some simlynk failed" and boot is locked… :-(

    I turn back to v12.

    • 08/16/2014
      Russia

      30 dls on the needrom, and 44 dls on yandex disk, and you fist who ask for this problem.

      Please send me the install log file, and me see it for any errors.

    • 07/03/2015
      Italy

      @cabal_73

      hai esteso la partizione primaria ad 1gb?

      se non lo hai fatto, scarica lo zip contenente i diversi tipi di partizione primaria e poi segui la procedura che avevo già inserito in precedenza e più precisamente:

      1) copy rom (v13) into your sdcard;
      2) copy zip file with the partition type into your sdcard (i used System1Gb-Data5.0Gb);
      3) wipe cache, dalwik, factory, system;
      4) install zip file with the partition type (System1Gb-Data5.0Gb)
      5) reboot into recovery
      6) wipe cache, dalwik, factory
      7) install the v13 rom with default options
      8 ) reboot system

      thanks to @vell for this fantastic rom!

  10. 02/04/2013
    Italy

    I agree with you!

    It is a my problem, not the ROM v13.

    I find the problem from log:

    symlink: failed to symlink /system/bin/watchprops to toolbox: No space left on device
        script aborted: symlink: some symlinks failed
      symlink: some symlinks failed

    Installer Error (Status 7)

    End at : Wed Sep  9 04:50:25 2015

    But this v13 ROM is bigger than V12, I suppose… right?

    Thank you!

     


Leave a Reply

You must be logged in to post a comment.