• Title: Lenovo Vibe X2-AP
  • Listed: 06/20/2015 7:39 pm
  • ROM Version: X2-AP ROW S223 & OTA S224, S228
  • You must be logged for ROM download.

Overall Rating : 57

74286 total views, 5 today

48 Total favorites


Lenovo Vibe X2-AP
Lenovo Vibe X2-AP - Image 1Lenovo Vibe X2-AP - Image 2Lenovo Vibe X2-AP - Image 3Lenovo Vibe X2-AP - Image 4

Author adMember Info


Please use latest version of WinRAR or 7Zip

Official ROM Lenovo X2-AP Version: X2-AP_ROW_S223_150528 (Lollipop 5.0)

Gapps include – No Rooted



1. Open flash_tool.exe from SP_Flash_Tool_v5.1512.00 folder
2. In Flashtool, select the MT6595_Android_scatter.txt from the target_bin folder. Wait file to be added into Flash Tool
3. Make sure “DA DL All with Checksum” is checked in Options -> Options -> Download   OR YOUR PHONE WILL FAIL TO BOOT!
4. Turn off your phone.
5. Select "Firmware Upgrade" or "Download only", but do not use "Format All + Download", because you will lose your IMEI and MAC
6. Press Download
7. Connect your phone into the computer via USB data cable.
- install driver from Drivers folder, if needed (you may have to disable Windows Driver Signature Enforcement)
- The process will start and a red progress bar will appear after, yellow, grey and green circles is displayed, the phone is successfully flashed
8. Disconnect the USB cable from the phone and turn it on. It will take few minutes for the phone to boot for first time




New TWRP recovery files added.

ADB and MTP on recovery mod.


Ota files modified to install over TWRP

S224 OTA file added (S223 to S224)

S228 OTA file added (S224 to S228)

Because ota files, created as differantial update, you need to allready installed previouse version

※Please make a backup of your device before installing or updating ROM

234 Responses to“Lenovo Vibe X2-AP”

  1. 03/11/2015


    I have succesfully restored nvram through twrp but the system is very unstable. It frezzes and reboots randomly all the time. Does any one faced this problem ? Any ideas?

    • 06/27/2014


      First, when you have restored nvram in TWRP , have you restored only nvram, or system and/or data as well? as  it must be nvram only! if you have missed that, you probably need to reset the phone in TWRP. (I would instead suggest reflashing the rom and then restoring only nvram though, that would be safer)

      is your phone an AP or a CU model? if CU, you must also restore 2 modem files for it (check xda vibe x2 thread, files posted by Eryen). have you cleared cache/dalvik? if all that fails, do a reset in TWRP (will leave you SD contents untouched).

      sorry, that's all i can think about.


  2. 08/08/2015



    I have succesfully flashed my phone (dual SIM, CU) during the last weekend to the version X2-AP_ROW_S223_150528. Than the system was automatically updated to the version S224.

    Both SIM (after reboot) had original IMEI and phone worked quickly and without any problems, great wifi, better GPS signal, After 2 days one of the SIM (slot 1) dropped out and didn´t work. I rebooted the phone, and it started to work. But today it doesn´t work anymore. SIM in slot 2 works, but isn´t stabil, slot 1 doesn´t work. Even rebooting didn´t help.

    I'd like to ask whether you can write the specific steps (for dummies :) ) to stabilize the phone. Thank you very much in advance!

  3. 06/01/2015

    Czech Republic

    Can this ROM be used on X2-CU? Thanks

    • 05/04/2013

      Slovakia (SLOVAK Republic)

      jonzR: yes, good ROM. all woks good – problem only LTE :(  (ano môže a ide mi dobre už od leta) 

  4. 08/05/2015


    Does anybody have the link to eryen's mediafire folder as i want to download some stuff from there

    also as & when i connect my phone i.e X2 AP in meta mode to pc it shows Vibe X2 in device manager and the drivers fail to install

    any help will be appreciated 

  5. 09/11/2014


    I flashed the ROM. The system does not recognize internet and bluettooth. It is like the phone had not these devices. Even I set it to "on" it automatically goes to "off". Has anyone had this problem and knows the solution (my model is CU)?

  6. 08/17/2015

    Korea Republic of

    First of all thank you to eryen for providing AP version!

    and I have one quick question that I guess I successfully installed AP version that you attached.

    Everything seems working great but I cannot access to 4g. 3g works great but my phone cannot connect to 4g.

    I set APN and everything.

    My phone was CU version before. Should I do something more?

    I replaced sim card just in case but no luck.

    Please help me!!

  7. 10/27/2014


    hello friends I am not able to install in x2-cu begins and say DA100º can someone please help

  8. 07/29/2015

    Iran (ISLAMIC Republic Of)

    Hi Every body,

    I have a problem and trying every method about two weeks but there is no solution.

    I have X2-TO version and Flashed the eu version(Foramt All+Download) with out getting NVRAM backup.

    Now I Have only one active SIM (Slot2: X2-L.MD2.V3, 2015/05/11 10:14) and slot 1 is Unknown.

    I tried Maui META But it's not recognize my phone.

    I am very confused, PLEASE HELP ME

  9. 11/02/2013


    can't download… link is broken, pls fix it


  10. 11/02/2013



Leave a Reply

You must be logged in to post a comment.