- Title: JIAYU G4S KK
- Listed: July, 2014
- Last modified: 10/29/2014 6:55 pm
- Version: ROM Android 4.4.2
You must be logged for ROM download.
99527 total views, 19 today
404 Total favorites
Member Info
DESCRIPTION
ROM Phone JIAYU G4S – ROM Android 4.4.2
Update Official ROM JIAYU G4S WCDMA : G4S-20141022-222444 – KOT49H
Version Flash (FL)
————————————————————————————————————————————————————————-
Update Official ROM JIAYU G4S WCDMA : G4S-20140927-1826499 – KOT49H
Version Flash (FL)
————————————————————————————————————————————————————————-
Update Official ROM JIAYU G4S WCDMA : G4S 20140912-213816 – KOT49H
Version Flash (FL) or OTA (SD)
————————————————————————————————————————————————————————-
Info of dontneedrom
In the original ROM V3 (G4S-20140816-190609), Superuser, even if enabled in Settings, is not working.
You put the boot.img in the rom (rename boot.v3.fixsu.img –> boot.img) and after you flash your mobile
————————————————————————————————————————————————————————-
Warning：
1.This software only used for jiayu G4S（2GB RAM+16GB ROM） ,that's means this can't appropriate for any other model ,even can't match for G5S!
2.IF your phone upgrate to android 4.4 version,it can't downgrade to android 4.2 version(screen touch may not be correct),We may do not provide any technical support in this situation .
3.When doing upgrade progress，please choose “firmware upgrade”，mobile phone disk will be formatted ，backup your data is very Important !
Update Official ROM JIAYU G4S WCDMA : G4S-20140816-190609 – KOT49H
Changelog:
1 increase good domain theme, optimize interstellar global theme
2 increase in smart gestures wake-up function (the latest batch of models supported)
3 to increase the message notification settings switch, you can choose not to bright screen when information
4 settings - other settings - Noise Reduction menu add the following line to answer the vibration control switch, you can turn on or turn off this feature
5 Settings - Display in increased volume keys wake switch
6. repair screen driver compatibility issues
7 repair after entering the dial dial function without BUG
8 optimize RAM memory release, other small fixes BUG
————————————————————————————————————————————————————————-
This rom stay here in download just for members who've problems with screen.
Jiayu have deleted this ROM because many problems.
DON'T install this rom OK OK OK !!!!
————————————————————————————————————————————————————————-
UPDATE ONLY For the members who have flashed this rom and after no screen
1 .You download " Boot.img" and changed with the "boot.img" of the rom "G4S 20140724-114258"
2. After you flash your mobile ( always no screen)
3. and you reflash with this ROM JIAYU G4S – Update 06/09/2014 – FL
————————————————————————————————————————————————————————-
Don't install this ROM with screen LG 5 touch
ONLY MT6592
Official ROM JIAYU G4S WCDMA : G4S 20140724-114258 – KOT49H
Changelog:
1 Increase good domain theme, optimized interstellar global theme
2 increase the intelligent gesture wake-up function (the latest batch of models supported)
3 Increase the message notification settings switch, you can choose not to bright screen when the information
4 settings – other settings – Noise Reduction menu add the following line to answer vibration control switch, you can turn on or off this feature
5 Set – Show in increased volume key wakeup switch
6 Fixed buttons on the version without vibration BUG
7 Repair dial function without entering dialpad BUG
8 optimize RAM memory release, other small fixes BUG
Gapps include – No Rooted
Language support: Multilang
Install ROM :
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6592_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
※Please make a backup of your device before installing or updating ROM
mine says "icm=0-hx8394_lg47" thats means 47 would work ?
or all LG screens will have the same problem?
I have the same screen and I don't recommend to use this ROM, because flash it and now touch don't work at all
Alani,its same screen as mine & highly recommend you to avoid this rom,cause you ll have touch screen totally out of work and flashing other roms will not help..i seriously don't know what to do with my bricked phone ,guys.Its simply dishonestly from jiayu programmers to upload such buggy content
Thanks for the reply's lotos4u, ruslankin2010 !
My phone says “Auo45″ means that a 4.5″ display? I thought that the G4S Bad a 4.7″ display.
URGENT NEWS
From Team Force we recommend you DO NOT INSTALL THE LATEST STOCK VERSION FROM EJIAYU FOR EJIAYU G4S (20140724-114258) since updated the firmware of the touch screen. With which, from that moment, the touch screen will only work well on this official rom and which are taken out afterwards.
In any version that is not based on the touch this stock will malfunction and to date NO POSSIBLE SOLUTION.
Please pass this notice to all holders of Jiayu G4S.
IT IS VERY URGENT!
Thank you.
I installed this ROM from other site where was no info about bad touchscreen and then I tried to install ROM from TeamForce and touchscreen in Jiayu G4S is not working good. I tried install the newest official 4.2.2 (18 June) and was the same problem too. Now I have the 20140724-114258 and touchscreen is working good but if I install any other version my touchscreen is not working good. What I can do?
hello!
i don't know how to connect 3g because i can't set apn code in settings. Does somebody know why?
instruction from jiayu on how to repair phones with lg 5 touches screen if you flashed this rom
Android 4.4 v2.0 version the touch screen failure recovery method
1.download the new firmware G4S-20140724-114258 V2.0 from http://pan.baidu.com/share/
（if you have this file，you don't need to downlad it again），Then extract the file.
2.Downlad the file boot.img（The driver file of the old version） form http://pan.baidu.com/s/
3.The downloaded file “boot.img” to replace the original documents in the firmware G4S-20140724-114258 V2.0,and then flash this fireware.
4.resatart the smartphone,the touch screen will worked,but the touch coordinate deviation
5、flash the The old firmware android 4.2（version：G4S-20140609-
Since the Android 4.4 v2.0 version of the software on individual mobile phone compatibility problems (individual mobile phone touch screen don't work after updated), we will suspend the relevant software download, Until the problem is resolved to provide software download service.
Well i'v tried that way but the problem still persists, so i have to wait for a while for a good fix.
Hi,
Did any of you or people at Jiayu tried this procedure?
It simply doesn't work.
If you download the 4.4 firmware and replace it with the boot image you don't have root afterwards but in my case the display is perfect. The problem is that without root there is no way to do anything.
If I try to put 4.2 firmware the only way I can do it via SP Flash Tools is by firmware upgrade and then the display is again fu***ed up.
This is simply disgraceful. A mistake performed by a company which is "solved" with another mistake.
You have put so many people in this situation so I guess you should try harder to help those who can't use their phones anymore due to this mistake.
Regards
C
Has anyone tried to make the steps to flash, and at the 4.2.2 point to flash the firmware android 4.2 （version：G4S-20140609-211642） from recovery ?
I try your manual without effect repair. I change boot.img in computer file. I open flash tools and upgrade 24.7.14 (I use my first version) with new boot.img. I don´t turn on mobile and reflash 6.9.14. Turn on mobile still same problem with diplaye. I try again in flash tools – upgrade on 24.7. turn on mobile wait to sim card connect. Turn off mobile and change upgrade 9.6. problem with display still alive. I dont know what can I do. Please help.
Have you resolved brick touch for display auo45?
Hello, same case for me, is incredible. Spend days and not solution.