- Title: JIAYU G4S KK
- Listed: July, 2014
- Last modified: 10/29/2014 6:55 pm
- Version: ROM Android 4.4.2
You must be logged for ROM download.
99513 total views, 5 today
404 Total favorites
Member Info
DESCRIPTION
ROM Phone JIAYU G4S – ROM Android 4.4.2
Update Official ROM JIAYU G4S WCDMA : G4S-20141022-222444 – KOT49H
Version Flash (FL)
————————————————————————————————————————————————————————-
Update Official ROM JIAYU G4S WCDMA : G4S-20140927-1826499 – KOT49H
Version Flash (FL)
————————————————————————————————————————————————————————-
Update Official ROM JIAYU G4S WCDMA : G4S 20140912-213816 – KOT49H
Version Flash (FL) or OTA (SD)
————————————————————————————————————————————————————————-
Info of dontneedrom
In the original ROM V3 (G4S-20140816-190609), Superuser, even if enabled in Settings, is not working.
You put the boot.img in the rom (rename boot.v3.fixsu.img –> boot.img) and after you flash your mobile
————————————————————————————————————————————————————————-
Warning：
1.This software only used for jiayu G4S（2GB RAM+16GB ROM） ,that's means this can't appropriate for any other model ,even can't match for G5S!
2.IF your phone upgrate to android 4.4 version,it can't downgrade to android 4.2 version(screen touch may not be correct),We may do not provide any technical support in this situation .
3.When doing upgrade progress，please choose “firmware upgrade”，mobile phone disk will be formatted ，backup your data is very Important !
Update Official ROM JIAYU G4S WCDMA : G4S-20140816-190609 – KOT49H
Changelog:
1 increase good domain theme, optimize interstellar global theme
2 increase in smart gestures wake-up function (the latest batch of models supported)
3 to increase the message notification settings switch, you can choose not to bright screen when information
4 settings - other settings - Noise Reduction menu add the following line to answer the vibration control switch, you can turn on or turn off this feature
5 Settings - Display in increased volume keys wake switch
6. repair screen driver compatibility issues
7 repair after entering the dial dial function without BUG
8 optimize RAM memory release, other small fixes BUG
————————————————————————————————————————————————————————-
This rom stay here in download just for members who've problems with screen.
Jiayu have deleted this ROM because many problems.
DON'T install this rom OK OK OK !!!!
————————————————————————————————————————————————————————-
UPDATE ONLY For the members who have flashed this rom and after no screen
1 .You download " Boot.img" and changed with the "boot.img" of the rom "G4S 20140724-114258"
2. After you flash your mobile ( always no screen)
3. and you reflash with this ROM JIAYU G4S – Update 06/09/2014 – FL
————————————————————————————————————————————————————————-
Don't install this ROM with screen LG 5 touch
ONLY MT6592
Official ROM JIAYU G4S WCDMA : G4S 20140724-114258 – KOT49H
Changelog:
1 Increase good domain theme, optimized interstellar global theme
2 increase the intelligent gesture wake-up function (the latest batch of models supported)
3 Increase the message notification settings switch, you can choose not to bright screen when the information
4 settings – other settings – Noise Reduction menu add the following line to answer vibration control switch, you can turn on or off this feature
5 Set – Show in increased volume key wakeup switch
6 Fixed buttons on the version without vibration BUG
7 Repair dial function without entering dialpad BUG
8 optimize RAM memory release, other small fixes BUG
Gapps include – No Rooted
Language support: Multilang
Install ROM :
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6592_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
※Please make a backup of your device before installing or updating ROM
Today I installed original Jiayu KitKat-ROM (24.07.2014) on my G4S with …AOU45… display.
Before flashing, I did factory reset, deleting cache and dalvik cache via CWM-recovery!
I flashed rom with SP FlashTool V5.14…: After selecting scatterfile in flashtool I UNchecked preloader for security reasons and recovery, cause CWM already installed.
I knew about no possibility of rolling back to 4.2.2 …
After flashing I restored programms via TitaniumBackup: Restoring only programs and program data!! (Restoring all data including settings resulted in boot loop …)
It's the first KK-Rom that's running great on my G4S! (I had big problems on all custom roms I tried).
Issues:
=> Restoring IMEI (MobileUncleTools) was necessary! I did IMEI backup before flashing.
=> touch vibration is working
=> sd card is mounted
=> TitaniumBackup especially restoring is working! On another flashing-try before TitaniumBackup was not restoring … I think - but I'm not sure – it's important to do the steps in recovery (factory reset, deleting cache-partition, deleting dalvik-cache)
=> Root! (must be enabled in system settings)
=> Deinstalling chinese crap (~ 9 programs) via Rom Toolbox
=> GPS: It's working, but the same bullshit as before …
Until now I'm very satisfied with the rom!
The GPS is working fine but the setting from aGPS are the problem, if you enter in Engineer mode at agps you se that the default SLP Template is Nokia, change it to google and try out the gps … i'v had the first lock in about 1 minute, then in about 20-30 seconds. The problem is that after the phone restart the SLP changes back to nokia. I'v tried to make the SLP Template to stay on google but no success, after the phone restart the SLP Template was still nokia.
A problem with the location is with the weather and clock widget … the widget location is not accurate like the 4.2.2 rom, it takes to long to see the location and it is not showing the street address like in the 4.2.2 rom, it is showing just the name of the city.
The SD card is mounted and i can see and use even the internal memory, but the problem is that the SD Card is mounted as sdcard0 and the internal memory as sdcard1, so in this case the SD Card is used as internal memory. I'v tried to setup the settings to use the internal memory and the applications are installed to the SD Card, i tried to setup the setting to use the SD card and the aplications are installed again to SD Card … so the internal memory is not used at all.
I tried 2 configurations of "Preferred install location":
System settings => General => Storage => Preferred install location: "internal device storage" or "Let system decide".
I just installed app from google market monitoring free memory of "internal device storage" before and after installation … In both cases app was installed in "internal device storage"! So everything is o.k., isn't it?
Camera is storing on external sd, so that's ok to me, too!
What the hell you spoke? this rom is most powerfull shit what I have. I have because I can´t delete after instaling 24.7. have every other rom display problem. I´m prisoner of this rom. Change boot.img is not working.
Sorry, but on my G4S it's running very good on day 2 after installation! I have Auo45 display, not LG! I tried several other KitKat-Roms (TeamForge, Borx) and had problems on MY G4S, not so on original Jiayu KK (2014-07-24).
GPS
I had big problems with GPS after installing original KK Rom. Absolutely No Fix! I know about config of GPS.conf, AGPS and EPO, but that was not the reason for malfunction of GPS.
After some clicking in MobileuncleTools (Engineer Mode => Engineer Mode (MTK) => Location => Location Based Service => GPS) I did a "Full" Start of GPS: First click "Full", second click "GPS (OFF)", it changes to "GPS (ON)". I was standing outside, blue sky, no clouds, waiting about 1 minute and had my first Fix! Next step is very important, I think: After Fix I clicked "Ref Position" and "Apply Last Location". Before I did this, Ref Position was Latitude 0 Longitude 0. Now it's: 51.96… / 7.55… (somewhere in germany). After these steps Fixing is in some seconds or less than 1 minute! It depends on wheather conditions and location.
GPS on my G4S is not perfect like on my Galaxy Note (N7000), but now I'm satisfied!
picture taken in car, clear sky
"Smart Wake" feature is working good!
@Roskoamatista to enter in recovery use mobileuncle tools, after the phone reboots it shows an android icon, press once on power button and the recovery menu apears. VOLUME DOWN is for moving the cursor and VOLUME UP is to select the option.
Have you resolved brick touch for display auo45???
I had no problems installing Rom on my G4S (auo45 display). But rolling back is not possible!! => I restored backup of my official 4.2.2 Rom for curious purposes => display didn't not work properly!
Xposed and Gravity installed succesfully. Most features of Gravity working like expanded Power-Menu or classic GPS symbol, other features don't run like hiding "3G" symbol in status bar …
Hey otto8,
let me understand. Summarizing you:
- put 4.4.2 v2.0 and the touch was fine
- went back to 4.2.2 and the touch become b0rked
- put 4.4.2 v.2.0 again and everything returned fine
And you have an AUO display.
Is that correct?
Thank you
Is here some Hero which repair display for other rom. Now I have LG 5 display set in rom 24.7. When I install any different rom is problem with touching on display. Reaction on display is upper. (click on home button I must touch on above home button). Only in rom 24.7. is right. Before install this rom I have right display in rom version 9.6.14