189

Title: MIUI 8 6.11.3
Listed: July, 2016
Last modified: 10/23/2016 10:20 pm
Version: 4.4.2

You must be logged for ROM download.

Overall Rating : ★★★★★ 9

27891 total views, 11 today

8 Total favorites

CUSTOM

Author ad Member Info

Listed by: Dave@NeedRom
Member Since: 02/06/2014

DESCRIPTION

>>>>Xiaomi.eu drop'd the support of weekly ROM's for all the Android 4.4 based Xiaomi Phones. They will only release Stable for these Android 4.4 Phones. The Version 6.11.3 will be so far the last real Multilanguage ROM Port. I will port the stable rom as soon as it's been released.<<<<

Hello,

i present you a port of Xiaomi's MIUI 8 to our Zopo phone (mainly 980/C2).

Base work is made by Vell, a great friend and mentor in case of porting this rom to our Zopo phone.
I will continue his work as far as i can.
I have a Zopo 980 2/32 so i test every port i will release here. And my native language is german, i can speak and write english but for russia i have to use Google Translate, so be prepared

Original Topic is here.

In case of bug's, Errors, Problems:
Please give me as much Info as possible, my Crystal Ball is not ready yet, still need some parts for it. but still keep in mind, i port this in my free time, and in case of bigger, deeper problems i have to consult others, i don't really have the deep knowlage of Android programming and/or porting. All i know, comes from Vell, his help and his post, where i helped out too, like many of you may know.

Language_included_in_MIUIv8:	Select Show
multirom.me team Chinese, English, German, Lithuanian, Russian, Ukrainian, Xiaomi.eu team English, Chinese, Polish, Slovak, Czech, Bulgarian, Hungarian, French, Russian, Ukrainian, Croatian, Vietnamese, Italian, Greek, Norwegian, Dutch, Spanish, Turkish, Brazilian-Portuguese, Portuguese, Serbian, Hebrew, Romanian, German, Catalan, Korean, Slovenian, Thai

Known_issues_when_run_on_ZOPO_phones:	Select Show
- You can't OTA upgrade this firmware! You would download a firmware for Xiaomi phone, but we have a ZOPO, this is why we need to port. - 3G Internet only works on the first (small) SIM card. - regardless of the displayed amount of RAM of 1GB, but the full 2GB are used (if present) - ART does not work properly on this firmware. - Bluetooth not works with some devices - In HD mode blur in the notification bar is shifted (and if you take a screenshot, it's OK) - In all firmware when switching between HD and FHD mode after installing and running the firmware is not to panic, that the entire screen crooked, just reboot again. - If you have a crashes in the first initialization, try to set English language, and after completed select your own language in the settings. - If you do not activate Mi account, try to activation of the English language, and then in the settings, select your own language.

Known_issues_when_run_on_ZOPO_phones:

Select Show

Helpfull_information	Select Show
Getting root rights (MIUI V7 only so far, MIUI V8 needs SuperSU so far) Run the program wich requires root rights and close it. Go to the program security -> permission -> root access. There you will see all the programs that have ever asked for root. Conversely relevant programs tap slider and agree with all the warnings. Restart your program and it gets root right. Additional software is not required! For those who have in applications like Viber, WhatsApp, VK… messages arrive only after turning on the screen. Go to Settings -> Additional settings -> Battery -> Manage apps battery usage -> disable! or uncheck needed apps. Apps must be added to the startup. Program Security -> Permissions -> Autostart. If Widgets won't start after restart. Put the App in autostart and the widget will load on restart again. How to save the photos on internal SD card Starting with version 5.10.15 in the camera settings there was an option where you can select where to save pictures. If option "save to external memory" is on will be saved to the external SD card, and off on the inside. If calendar is not synchronized with Google Delete the Google Calendar app, sync calendar in settings, install Google Calendar from the playmarket, or not to use it. To enter in recovery you need: – A App call'd MobileUncle Tools wich needs root access or – go to the MIUI Updater app, press the 3 little dot's in the upper right corner -> Restart to Recovery or – Turn off the phone – Connect the phone to a charger – Press both "volume+" and "on" If you set brigness at minimum and screen is off simultaneously press the menu button and volume up

Helpfull_information

Select Show

Special_thanks:	Select Show
MIUI official developer team for the excellent firmware. Team MultiROM.me, xiaomi.eu, miui.su and MiuiPro.ru for translations. Vell for doing a great job in porting this to our Zopo phone and for beein a good mentor so i can continue his work Amarullz for the excellent app: Aroma Installer. paolothlw8 for global opportunity just to install firmware on Android 4.4 KitKat. mSH for compiled the kernel source, with the corrected settings for the proximity sensor. dreamer7 for compiled the kernel source, with a lot of tweaks. Ancifer for MIUI ports from Multirom.me, Vell picked at it and was able to reproduce them and that gave information about the principle repacking of boot.img. SergeyProl for config`s template for Aroma (got with him ModifyRom). andrey_artphoto for a mod to disable the sound when a USB is connected. Dark Star for translation English Installation. mihei78 for HD mode. Creators, Administrators, Moderators, Curators forums china-iphone.ru and 4pda.ru for creating and maintaining a human-readable form of the above forums. All forum users who gave advice.

Special_thanks:

Select Show

Kernel_modification_description	Select Show
Important!: All kernels taken from boot paolothlw8, mSH and dreamer7. For C3 is physically no modifications proximity sensors and rotation sensor, with any choice of settings of the sensors will be installed the default kernel. In the name of kernel modifications present 5 unit: 1. The author of the kernel build 1.1. P – paolothlw8, The Italian master ,building for the first kernels Android 4.4 KitKat. Present all possible modifications. 1.2. M – mSH, Magician with china-iphone.ru forums, make us a kernels with a correct a proximity sensor (ALSPS). There are no modification: Alt and HD. 1.2. D – dreamer7, Developer with china-iphone.ru forums, make a kernels with a lot of tweaks. Present all possible modifications. 2. Phone model: 2.1. C2 – ZOPO C2 or ZOPO ZP980. 2.2. C3 – ZOPO C3. 2.3. C7 – ZOPO C7 or ZOPO ZP990. 3. Modification of the rotation sensor: 3.1. A – Default setting. 3.2. B – Should be selected if the A modification in landscape phone position – picture flipped upside down. 4. Modification of the proximity sensor: 4.1. Norm – Default setting. 4.2. ALSPS – Reconfigured sensor Norm respected mSH, to choose if Norm does bad work, but it works. 4.3. Alt – Alternative sensor, if selected Norm or ALSPS does not work just do. 5. Screen resolution: 5.1. FHD – Full HD (1280×1920) – phone screen native resolution. 5.2. HD – HD Ready (720×1280) – donor rom native resolution (reduce memory consuming, accelerate 3D application). Kernels info: dreamer7 kernel build with a few advanced features: - VM Dirty ratio tweaks - Added frandom driver - Faster NOATIME and NODIRATIME mounting flags - Asynchronous I/O latency to a solid-state disk greatly increased - Compile vfp with neon - Random: Entropy tweaks - CPU governor added – ZZMOOVE (Default) - New IO Schedulers added – ROW, ZEN, SIO (Default SIO – 1024) - Intelli_plug driver (by @faux123) – An interesting thing which is now engaged in enabling and disabling cores (support profiles and some settings), also allows you to set the frequency in offscreen mode (754 instead of 1209 exhibited in the standard) - Optimized ARM RWSEM algorithm(by @faux123) - added multi core saving mode - Sweep2Wake, Sweep2Sleep – disabled at the kernel level - LZ4 - F2FS support (yet in fact, it is necessary to build the kernel for recovery to install the system on this FS) - O3 optimization when assembling + other optimizations - support for workqueue power-efficient mode - implement LoUIS API for cache maintenance ops - update cpu_suspend code to use cache LoUIS operations - shorten freezer sleep time using exponential backoff - wireless: Increase scan entry expiration to fit new scan time - flush L1 cache in cpu_die - Bluetooth: Fix SSP acceptor just-works confirmation without MITM - Bluetooth: fix possible info leak in bt_sock_recvmsg() - various fixes in processing workqueue - ALSA: pcm: fix fifo_size frame calculation - fixes in the TCP subsystem - new cpu governors: [pegasusq], intelliactive, sakuractive, nightmare, interactivex, lulzactiveq, smartassV2 - slightly corrected the intelliplug settings and a lot of other patches … Recommended application to configure the kernel features – Kernel Adiutor

Kernel_modification_description

Select Show

Fully Changelog (for detaild MIUI Changelog visit here)

Changelog:	Select Show
07.11.2016 v68 [U] Base firmware changed to 6.11.03 [+] Added a choice of selecting older Dreamer7 V3.0 kernel, for the 1/16 Phones [+] Added some new Lockscreens and Wallpaper 30.10.2016 v67 [U] Base firmware changed to 6.10.27 23.10.2016 v66 [U] Base firmware changed to 6.10.20 [-] Removed the Animated Boot Logo to get lesser Archive filesize 18.10.2016 v65 [U] Base firmware changed to 6.10.13 03.10.2016 v64 [U] Base firmware changed to 6.9.29 [+] Added Camera Click Sound (On/Off) selection in Aroma Installer 26.09.2016 v63 [U] Base firmware changed to 6.9.22 22.09.2016 v62 [U] Base firmware changed to 6.9.15 12.09.2016 v61 [U] Base firmware changed to 6.9.8 [U] Open Gapps changed back to pico-20160815 due to reboot problems [+] Added Titanium Backup [+] Added (in filesize) smaller Static (with moving Dot's) Bootanimation 07.09.2016 v60 [U] Base firmware changed to 6.9.1 [U] SuperSU updated to V2.78 28.08.2016 v59 [U] Base firmware changed to 6.8.25 [U] Open Gapps update to pico-20160826 [U] Update kernels by dreamer7 up to v3.2.1 version 25.08.2016 v58 [] not released due to internal testing [U] Base firmware changed to 6.8.18 15.08.2016 v57* [U] Base firmware changed to 6.8.11 [U] Open Gapps update to pico-20160815 09.08.2016 v56 [U] Base firmware changed to 6.8.4 [U] Open Gapps update to pico-20160806 02.08.2016 v55 [U] Base firmware changed to 6.7.28 [U] Open Gapps update to pico-20160731 [U] Update kernels by dreamer7 up to v3.2 version 21.07.2016 v54 Problem with Port, v54 will not be posted 17.07.2016 v53 [U] Base firmware changed to 6.7.14 [U] Open GApps updatedto pico-20160713 [U] SuperSU updated to v2.76 10.07.2016 v52 First release on this Topic, continue the version numbers based on Vell's Port [U] Base firmware changed to 6.7.7

Changelog:

Select Show

Terms_of_use_and_distribution:	Select Show
This firmware is provided "as is". The author disclaims all related warranties, including all implied warranties of merchantability and compliance with the intended use. The author shall not be liable for any special, direct, indirect or induced by damages, and any damages for loss of use, loss of data or profit, under the action of the obligations, negligence or other malicious actions that occur without or in connection with the use or performance of this software. If you want to share this file with friends, please post a link to this page, not the file itself.

Terms_of_use_and_distribution:

Select Show

How_to_extend_the_system_partition	Select Show
Increasing the System partition to 1.0 Gb with simultaneous increase of the Data partition. Suitable only for those who have the native phone memory partition. Available options: System1Gb-DataStock.zip —- increases the /system partition up to 1GB, /data partition to 1.5GB. System1Gb-Data2.5Gb.zip —- increases the /system partition up to 1GB, /data partition up to 2.5GB. System1Gb-Data5.0Gb.zip —- increases the /system partition up to 1GB, /data partition up to 5GB. System1Gb-Data10.0Gb.zip – increases the /system partition up to 1GB, /data partition up to 10GB. Important: 1. There will be formatted partitions System, Cache, Data and Emmc (internal SD) – save data if necessary! All data in internal Sd will be destroyed! 2. If you want to return the native partitions the install through recovery SystemStock-DataStock.zip (by analogy with System1Gb-DataStock.zip) Attention! Be careful when performing the instructions! Thoughtfully read and not to deviate from the above course of action. Pay particular attention to the strict implementation of the right step 3. For any wrong-doing will be a brick! Instructions: First, make a backup of the existing firmware and/or copy to an external SD card file with the new firmware, which will be installed after repartition. After performing the following steps will have a mobile repartition phone WITHOUT SYSTEM, it is necessary to reinstall or restore from backup! 1. Take the patch from the folder "Patches for Recovery", for example, System 1Gb-DataStock.zip, copy it to the SDcard (extSDcard – a removable SD flash drive and nothing else!). 2. Install it through Recovery (I recommend CWM 6.0.4.4 but TWRP 2.8 will work too). 3. Reboot again in recoveri and format (wipe) partitions System, Cache and Data. 4. Connect your phone to your PC, go to the Recovery section "Mount", and mount intSDcard – internal memory as a USB-drive to your PC. And with the PC format the intSDcard – internal memory in fat32 (cluster size you can leave the standard). 5. Repartition passed. Restore your firmware from backup or install the new one. Attention!!! 1. Do not repartition the memory in other ways. If you wanne go back to the native partition layout use the System1GB-DataStock.zip, otherwise you will get a brick. 2. Whatever you do – do at your own risk. 3. The archives with patches has detailed instructions on rusiian language (use Google translate if necessary). C2 ROM-4GB System_1.0gb.7z This patch is only for ZOPO C2 with 4GB ROM !!! System 1Gb-DataXXGb.7z This patch for all others This recovery only for repartition!!! Recomended recovery for C2/980, C3 Recomended recovery for C7/990 Original information with the repartition files Original post with recovery for C2/980, C3 Original post with recovery for C7/990 To install any firmware 4.4 Kitkat you must use the TWRP 2.7.1.0 or 2.8.0.0 TWRP 2.8.0.0 – is recomended

How_to_extend_the_system_partition

Select Show

Increasing the System partition to 1.0 Gb with simultaneous increase of the Data partition.
Suitable only for those who have the native phone memory partition.
Available options:
System1Gb-DataStock.zip —- increases the /system partition up to 1GB, /data partition to 1.5GB.
System1Gb-Data2.5Gb.zip —- increases the /system partition up to 1GB, /data partition up to 2.5GB.
System1Gb-Data5.0Gb.zip —- increases the /system partition up to 1GB, /data partition up to 5GB.
System1Gb-Data10.0Gb.zip – increases the /system partition up to 1GB, /data partition up to 10GB.

Important:
1. There will be formatted partitions System, Cache, Data and Emmc (internal SD) – save data if necessary! All data in internal Sd will be destroyed!
2. If you want to return the native partitions the install through recovery SystemStock-DataStock.zip (by analogy with System1Gb-DataStock.zip)

Attention!
Be careful when performing the instructions! Thoughtfully read and not to deviate from the above course of action. Pay particular attention to the strict implementation of the right step 3. For any wrong-doing will be a brick!

Instructions:
First, make a backup of the existing firmware and/or copy to an external SD card file with the new firmware, which will be installed after repartition. After performing the following steps will have a mobile repartition phone WITHOUT SYSTEM, it is necessary to reinstall or restore from backup!
1. Take the patch from the folder "Patches for Recovery", for example, System 1Gb-DataStock.zip, copy it to the SDcard (extSDcard – a removable SD flash drive and nothing else!).
2. Install it through Recovery (I recommend CWM 6.0.4.4 but TWRP 2.8 will work too).
3. Reboot again in recoveri and format (wipe) partitions System, Cache and Data.
4. Connect your phone to your PC, go to the Recovery section "Mount", and mount intSDcard – internal memory as a USB-drive to your PC.
And with the PC format the intSDcard – internal memory in fat32 (cluster size you can leave the standard).
5. Repartition passed.
Restore your firmware from backup or install the new one.

Attention!!!
1. Do not repartition the memory in other ways. If you wanne go back to the native partition layout use the System1GB-DataStock.zip, otherwise you will get a brick.
2. Whatever you do – do at your own risk.
3. The archives with patches has detailed instructions on rusiian language (use Google translate if necessary).

C2 ROM-4GB System_1.0gb.7z
This patch is only for ZOPO C2 with 4GB ROM !!!

System 1Gb-DataXXGb.7z
This patch for all others

This recovery only for repartition!!!
Recomended recovery for C2/980, C3
Recomended recovery for C7/990

Original information with the repartition files
Original post with recovery for C2/980, C3
Original post with recovery for C7/990

To install any firmware 4.4 Kitkat you must use the TWRP 2.7.1.0 or 2.8.0.0
TWRP 2.8.0.0 – is recomended

Description of the installation process:

New installation:
1. Make sure again that you have Extended the System to 1.0 Gb.
2. Recommended to install Recovery – TWRP 2.8.0.0 = for С2/980, C3 = = for C7/990 =
3. Make a full backup in Recovery.
4. Copy the archive file of the firmware on the internal or external SD card.
5. In TWRP Recovery do a Factory Reset under the Wipe Section.
6. Necessarily restart Recovery.
7. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
8. After the system boots, do not rush to use the phone, give him a lie down for 5+ minutes and wait until boot is completed then test/use it or make a restart.

Update a previous version:
1. Copy the archive file of the firmware on the internal or external SD card.
2. Make a full backup in Recovery.
3. Necessarily restart Recovery.
4. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
5. Wipe a Cache / Dalvik cache
6. After the system boots, do not rush to use the phone, give him a lie down for 5+ minutes and wait until boot is completed then test/use it or make a restart.

※Please make a backup of your device before installing or updating ROM

Responses to “MIUI 8 6.11.3”

10/11/2013

redfox91 on 11/07/2016 @ 1:00 am

Thanks for your work Dave!

Log in to reply.
02/06/2014

Dave@NeedRom on 11/07/2016 @ 5:18 pm

MIUI8 6.11.3 v68 Xiaomi.eu version now released!

[U] Base firmware changed to 6.11.3
[+] Added a choice of selecting older Dreamer7 V3.0 kernel, for the 1/16 Phones
[+] Added some new Lockscreens and Wallpaper

The choice for the Dreamer7 v3.0 kernel is for Phones with 1GB Ram.
Please feel free to test it out if you have problems with the current Dreamer7 kernel with your 1GB Ram Zopo.

Now the bad new As i understand it correct from Xiaomi.eu; this version will be the last weekly from them.
Xiaomi.eu drop'd the weekly Rom's for all Android 4.4 Devices.

They will only make Stable Roms for them from now on. And this stable versions i will port too if i can.

So, if i don't find a solution for porting other multilanguage Rom's, this will be the last "real" Multilanguage.

I keep a eye on Multirom.me Rom's and will port them as weekly if they provide them. But this will mean, there will be Russian, English and German language support only.

I don't have much luck in translating the Rom by myselfe. Everytime i try it, i get some Errors. If this would work, i could provide you guy's with multilanguage weekly, but sadly as i say'd, i have no luck so far .

If someone have some experience in Rom translating, plz write me a PM.

As for now, have some fun with the new/last weekly for our Zopo Phone.

Dave

Log in to reply.
11/05/2016

jerrys81000 on 11/07/2016 @ 9:10 pm

Ciao

Non riesco a portare a termine l'installazione mi rilascia il seguente errore "Your system partition must be more than 1000 mb and you have a 591mb " premetto la mia versione di zopo è zp980 2gb di ram e 32 gb rom.

ho provato ad utilizzare flash tools e i relativi file per aumentere la partizione ma rimane l'errore precedentece qualcosa che mi sfugge aiuti idee suggerimenti.

Grazie saluti

Log in to reply.
- 02/06/2014
  
  Dave@NeedRom on 11/07/2016 @ 11:21 pm
  
  Hello jerrys81000,
  
  your 2GB RAM has nothing to do with the System Partition.
  
  The System Partition is a space on the internal memory of your phone wich holds the Android System, in that case the MIUI.
  
  You need to repartition this space in order to install the MIUI8 on your phone. The original System Partition was'nt big enough to install the MIUI7 or 8.
  
  So, please follow the "How to extend the System Partition" Spoiler and you will be good to install the MIUI 8 on it. But please be carefull and read the Spoiler carefully.
  
  Dave
10/11/2013

redfox91 on 11/07/2016 @ 11:18 pm

Ciao jerrys81000,

Non sarà molto d’aiuto, lo so, ma prova a riseguire la procedura. Io, ad esempio, ho usato ” system 1gb data 10 gb”.
Dopo aver installato la partizione che preferisci (tramite recovery)e fatto i wipe indicati, la parte fondamentale è “montare” tramite recovery la memoria interna su pc ed una volta riconosciuta in Windows, formattarla anche tramite PC, come un dispositivo USB qualsiasi. Dopo aver seguito la procedura, installa il nuovo firmware… Io possiedo il tuo stesso dispositivo e non ho avuto problemi, magari ti è sfuggito qualcosa buona fortuna, anche se non ho aggiunto niente di nuovo… Sicuramente avrai anche i driver installati…

Redfox91

Log in to reply.
11/05/2016

jerrys81000 on 11/07/2016 @ 11:40 pm

Grazie redfox per la risposta celere

si esatto mi manca proprio qualche passaggio ad esempio la partizione tramite recovery.

Come carico i file system tramite twrp,di solito li ho sempre caricati con flash tools.

Saluti

Log in to reply.
10/11/2013

redfox91 on 11/08/2016 @ 12:08 am

Di nulla jerrys81000,

Se non hai già il root, eseguilo installando framaroot, lasciando selezionato installazione supersu e selezionando boromir. Una volta ottenuti i permessi di root, installa mobileuncle tools e tramite quest’ultimo installa le recovery dal Menù update recovery ( selezionando il file TWRP 2.8.0.0 che trovi in cima alla pagina). Adesso hai le recovery… Bel caso tu le abbia già, salta la prima parte.
Adesso scarica la partizione che preferisci, io ho usato quella da 10 gb ed inseriscila nella SD esterna o interna. A questo punto, entra in recovery (puoi farlo anche tramite mobileuncle tools), premi su install e vai a selezionare il pacchetto con la partizione che desideri installare. Adesso effettua i vari wipe, connetti il telefono al pc e, tramite il menù mount della recovery, monta la periferica USB sul pc. Adesso visualizzerai il telefono sul pc… Formattalo come una comune chiavetta USB, da risorse del computer. Dal menù reboot della recovery, riavvia in recovery, non in system, mi raccomando. Adesso hai la partizione estesa e puoi procedere con l’installazione del firmware dal menù install della recovery…per il kernel, prova dreamer 7 (newest), quando l’installazione te lo chiederà. Ti consiglio di caricare tutto su ad prima, così hai tutto pronto. Spero di esserti stato d’aiuto.

Redfox91.

Log in to reply.
10/11/2013

redfox91 on 11/08/2016 @ 12:11 am

Attendo aggiornamenti, in bocca al lupo

Log in to reply.
10/11/2013

redfox91 on 11/08/2016 @ 12:18 am

Scusami, il pacchetto con la partizione inseriscilo sulla SD esterna, come tutte le altre cose da installare

Log in to reply.
10/11/2013

redfox91 on 11/08/2016 @ 8:25 am

Un’altra cosa … Anche se con la risoluzione full HD va benissimo, ti consiglio di utilizzare la HD. Ne guadagni parecchio in prestazioni, soprattutto nei giochi. Ed anche in batteria leggermente… Lo schermo consuma meno carica

Log in to reply.
11/05/2016

jerrys81000 on 11/08/2016 @ 10:25 am

Grazie

stasera dopo il lavoro ci provo in effetti io mettevo i file sistem nella sd ma non capivo come installarli e poi attaccavo phone al pc e formattavo la sd e nella mia testa non mi capacitavo di come potesse aver preso la partizione sempère da pc formattavo l sd e poi procedevo all'installazione della custom.rom.

Log in to reply.

DESCRIPTION

Fully Changelog (for detaild MIUI Changelog visit here)

Responses to “MIUI 8 6.11.3”

Leave a Reply ▲

Leave a Reply
▲