• Title: MIUI 8 6.11.3
  • Listed: 10/23/2016 10:20 pm
  • ROM Version: 4.4.2
  • You must be logged for ROM download.

Overall Rating : 9

13769 total views, 1 today

8 Total favorites


MIUI 8 6.11.3
CompasLanguages_1Languages_2Languages_3MIUI 8 6.11.3 - Image 5Security AppWeather

Author adMember Info



>>>>Xiaomi.eu drop'd the support of weekly ROM's for all the Android 4.4 based Xiaomi Phones. They will only release Stable for these Android 4.4 Phones. The Version 6.11.3 will be so far the last real Multilanguage ROM Port. I will port the stable rom as soon as it's been released.<<<<


i present you a port of Xiaomi's MIUI 8 to our Zopo phone (mainly 980/C2).

Base work is made by Vell, a great friend and mentor in case of porting this rom to our Zopo phone. 
I will continue his work as far as i can.
I have a Zopo 980 2/32 so i test every port i will release here. And my native language is german, i can speak and write english but for russia i have to use Google Translate, so be prepared :(

Original Topic is here.

In case of bug's, Errors, Problems:
Please give me as much Info as possible, my Crystal Ball is not ready yet, still need some parts for it. :( but still keep in mind, i port this in my free time, and in case of bigger, deeper problems i have to consult others, i don't really have the deep knowlage of Android programming and/or porting. All i know, comes from Vell, his help and his post, where i helped out too, like many of you may know.



Fully Changelog (for detaild MIUI Changelog visit here)


Description of the installation process:

New installation:
    1. Make sure again that you have Extended the System to 1.0 Gb.
    2. Recommended to install Recovery – TWRP = for С2/980, C3 = = for C7/990 =
    3. Make a full backup in Recovery.
    4. Copy the archive file of the firmware on the internal or external SD card.
    5. In TWRP Recovery do a Factory Reset under the Wipe Section.
    6. Necessarily restart Recovery.
    7. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    8. After the system boots, do not rush to use the phone, give him a lie down for 5+ minutes and wait until boot is completed then test/use it or make a restart.

Update a previous version:
    1. Copy the archive file of the firmware on the internal or external SD card.
    2. Make a full backup in Recovery.
    3. Necessarily restart Recovery.
    4. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    5. Wipe a Cache / Dalvik cache
    6. After the system boots, do not rush to use the phone, give him a lie down for 5+ minutes and wait until boot is completed then test/use it or make a restart.


※Please make a backup of your device before installing or updating ROM

Donate with PayPal to Dave@NeedRom

189 Responses to“MIUI 8 6.11.3”

  1. 10/11/2013


    Ok, on effetti devi prima ottenere i permessi di root, installare mobile mobileuncletools, installare la Recovery (il file. Img della Recovery mettilo sulla SD) sempre tramite mobileuncletools ed una volta in recovery, procedere come ti ho descritto in precedenza. Non dovresti avere problemi ;) una volta installata, per accedere alla recovery, puoi farlo tramite il menù “riavvia in recovery” di mobileuncletools oppure collegando il telefono al pc, da spento, tenendo premuto solo vol+. In questi due modi potrai sempre accedere alla recovery. Ci aggiorniamo stasera. Se hai problemi, sono a disposizione ;)

  2. 11/05/2016

    United Kingdom

    Molto gentile



    • Dave@NeedRom



      Hello jerrys81000,

      think about to make a backup of all your data you have on your phone. Copy all needed stuff to your PC. With the process of repartitioning the internal SD-Card will be formated. So, as redfox91 mention'd, move all needed files for repartinioning and the new Rom Zip file to your external SD card. Or copy the new ROM Zip file after you formated the internal SD Card with your PC.

      Best procedure for this is:

      - Root your device like redfox91 say'd
      - Install MobileUncle Tools (it's no longer at the playstore): http://freeandroidroot.com/dow.....ncle-tools-apk/
      - start it and give it root rights
      - extract the TWRP img-file from within the TWRP.zip (from Download on top of this site, use the V2.8!! for repartitioning) and move it to your phone
      - go into "Recovery Update" and select the TWRP.img and flash it using the Mobileuncle Tools -> read the onscreen notes and follow them

      If you have install'd the TWRP and got a boot into it, please make a full TWRP backup to your external SD Card (if you have it), so you still have a backup if something goes wrong. Please turn on the MD5 checksum generation on backup (compression is not really necessary, but safes space).
      After you did the backup, trust me, do a 2nd one. Sometimes the backup get corrupted. So i never make backups without the MD5 checksum.

      Move the backup's to your PC (just in case).

      After this all….start the installing of the 1GBsystem10GB Data or what else fit's your need.

      redfox91 can help you out in this, because he speaks your language. I can help in german and english only.

      If you still have questions…plz feel free to ask.


  3. 11/05/2016

    United Kingdom

    Hi Dave

    thank for you support and you great job, my problem is not understanding to install partition stock with twrp.

    The above steps (eroot,mobileuncle ecc) already doings.

    i am Yet a job but promise that as soon as i finish work test your advice

    best regard 

    ps: sorry for my bad english

  4. 11/05/2016


    Hello, here I am

    I put the file in System 1 Gigabyte – Date 10 Gigabyte inside sd carried root, mobileuncle you make me recovery and behold, when I go to install and go to retrieve the files in the directory of sd TWRP not recognize any file and then I can not repartition memory.

    Once past this step should go in the mount tab and click-mount usb so that the pc recognize me the memory of the cell and extended format in fat 32 to make it to recognize the correct installer aroma?

    Thanks Google Translate

    ciao eccomi

    ho messo i file dentro System 1 Gigabyte – Data 10 Gigabyte dentro sd root effettuato, mobileuncle mi monta la recovery ed ecco che quando vado su install e vado a recuperare i file nella directory dell sd twrp non riconosce nessun file e quindi non riesco a ripartizionare la memoria.

    Una volta passato questo passaggio dovrei andare nel tab mount e cliccare su mount-usb in modo tale che il pc mi riconosca la memoria del cell estesa e formattarla in fat 32 per farla riconoscere ad aroma installer corretto?

  5. 10/11/2013


    Si, procedimento corretto jerrys81000… Sembra strano che la recovery non ti riconosca il Rar con le partizioni. Hai provato a cambiare cartella visualizzata nella recovery? Mi spiego meglio… Magari la recovery parte dalla memoria interna e non vedi il file se l’hai inserito in quella esterna. In alto ci dovrebbe essere un opzione per andare a vedere i file nella SD esterna. Aggiornaci ;)

  6. 11/05/2016


    - Copiato in SD

    ZOPO_C2_980_Extended_System_Partiton_Stock_ROM sia rar che scompattata 


    TWRP_2.8.0.0_ZP980 estratto "recovery.img"


    - Da moviuncle faccio partire la recovery e vado su Tab Install   qui ci sono i 2 file extended ecc.

    /sdcard/ZOPO_C2_980_Extended_System_Partiton_Stock_ROM/clicco su tutte le cartelle e non vedo i file 3 file "MT6589_Android_scatter_emmc e i 2 EBR" che penso servano ad espndre la memoria … Flash penso io a sto punto.

    penso di essere vicino alla soluzione ma non ci sono ancora

    grazie ancora per l'interessamento


  7. 10/11/2013


    Prova a prendere il pacchetto Rar system 1gb data 10gb. Dovresti installarlo tramite recovery senza scompattarlo, semplicemente selezionandolo dal menù install. Non lo riconosce?

  8. 10/11/2013


    Una volta installato il Rar, riavvia in recovery, dall’apposito menù reboot /recovery e procedi con la guida ;)

  9. 10/11/2013


    Non dovresti trovare i file scatter ed ebr 1 e 2… Quelli servono per il flashtool… Questi file, si trovano all’interno del pacchetto che vai ad installare con un click diciamo, senza scompattarlo ;)

  10. 11/05/2016


    dove posso re perire i file corretti perchè io sto utilizzando questi


Leave a Reply

You must be logged in to post a comment.