Welcome, visitor! [ Register | Loginrss

  • Title: MIUI 8 6.11.3
  • Listed: 10/23/2016 10:20 pm
  • ROM Version: 4.4.2
  • You must be logged for ROM download.


Overall Rating : 9


13028 total views, 1 today

8 Total favorites

  

MIUI 8 6.11.3
CompasLanguages_1Languages_2Languages_3MIUI 8 6.11.3 - Image 5Security AppWeather

Author adMember Info

Dave@NeedRom


DESCRIPTION


>>>>Xiaomi.eu drop'd the support of weekly ROM's for all the Android 4.4 based Xiaomi Phones. They will only release Stable for these Android 4.4 Phones. The Version 6.11.3 will be so far the last real Multilanguage ROM Port. I will port the stable rom as soon as it's been released.<<<<

Hello,

i present you a port of Xiaomi's MIUI 8 to our Zopo phone (mainly 980/C2).

Base work is made by Vell, a great friend and mentor in case of porting this rom to our Zopo phone. 
I will continue his work as far as i can.
I have a Zopo 980 2/32 so i test every port i will release here. And my native language is german, i can speak and write english but for russia i have to use Google Translate, so be prepared :(

Original Topic is here.

In case of bug's, Errors, Problems:
Please give me as much Info as possible, my Crystal Ball is not ready yet, still need some parts for it. :( but still keep in mind, i port this in my free time, and in case of bigger, deeper problems i have to consult others, i don't really have the deep knowlage of Android programming and/or porting. All i know, comes from Vell, his help and his post, where i helped out too, like many of you may know.

Language_included_in_MIUIv8:SelectShow
Known_issues_when_run_on_ZOPO_phones:SelectShow
Helpfull_informationSelectShow
Special_thanks:SelectShow
Kernel_modification_descriptionSelectShow

 

Fully Changelog (for detaild MIUI Changelog visit here)

Changelog:SelectShow
Terms_of_use_and_distribution:SelectShow
How_to_extend_the_system_partitionSelectShow

Description of the installation process:

New installation:
    1. Make sure again that you have Extended the System to 1.0 Gb.
    2. Recommended to install Recovery – TWRP 2.8.0.0 = for ะก2/980, C3 = = for C7/990 =
    3. Make a full backup in Recovery.
    4. Copy the archive file of the firmware on the internal or external SD card.
    5. In TWRP Recovery do a Factory Reset under the Wipe Section.
    6. Necessarily restart Recovery.
    7. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    8. After the system boots, do not rush to use the phone, give him a lie down for 5+ minutes and wait until boot is completed then test/use it or make a restart.

Update a previous version:
    1. Copy the archive file of the firmware on the internal or external SD card.
    2. Make a full backup in Recovery.
    3. Necessarily restart Recovery.
    4. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    5. Wipe a Cache / Dalvik cache
    6. After the system boots, do not rush to use the phone, give him a lie down for 5+ minutes and wait until boot is completed then test/use it or make a restart.

 



※Please make a backup of your device before installing or updating ROM


Donate with PayPal to Dave@NeedRom


189 Responses to“MIUI 8 6.11.3”



  1. Dave@NeedRom




    02/06/2014

    Germany

    MIUI6.10.20 v66 Xiaomi.eu version now released!

    [U] Base firmware changed to 6.10.20
    [-] Removed the big Animated Bootlogo to get lesser Archive File Size

    Dave

  2. Dave@NeedRom




    02/06/2014

    Germany

    Please feel free to post bugs and comments here. 

  3. Dave@NeedRom




    02/06/2014

    Germany

    If you guy’s have problems with downloading app’s from appstore with mobile data, than you have to hit the download button for the app. Uncheck the “only via WLAN” and after it “download”. Go to the miui downloader app and hit the 3 dot’s in the upper right corner and hit the “start all” and the download should begin.





  4. 10/11/2013

    Italy

    Thanks Dave! It’s work perfectly! Another fantastic update!
    :)





  5. 08/31/2013

    Serbia

    Hello Dave,
    whether there is a solution to the problem, shuting down the phone with this rom and kernel v3.2.1 Dreamer7. I think the problem with the zRAM of 12.5%, if there is this kernel with 25% of RAM or is there another solution for owners zopo c2 1/16 with extended system section 1Gb?
    Thanks a lot!

    • Dave@NeedRom




      02/06/2014

      Germany

      Hello nikolaslala,

      i don't know exactly what you are meaning. Are you speaking about Kernel Adiutor's ZRam feature? This feature does'nt increase the "RAM" it makes a virtual device inside RAM and use it as a "Swap Space". So you would gain a little performmance boost until this "virtual device" is full and than the paging starts on "normal" physical storage.

      The System partition of 1GB has nothing to do with the RAM. The system partition is, where the MIUI system are install'd. We had to repartition it, because the original system partition of the Zopo 980 was to small for the MIUI7 and 8.

      If you mean something different, plz tell me exactly what you are meaning or pointing me to that "app" (if it is one).

      If you have performance issues and hav'nt try'd it yet, please try the HD resolution instead the FullHD resolution. This gives you a relatively "big" boost.

      Dave

    • Dave@NeedRom




      02/06/2014

      Germany

      I found something on XDA Forum wich describes the ZRam Feature verry good. If you ask me if i can "edit" the kernel to remove this feature, than i have to say, no, i can't, sry.

      Dave

       





    • 08/31/2013

      Serbia

      Hello Dave,

      Thank you very much for your detailed reply.

      Try to be as detailed as possible in explaining my problem and also the problem of a large number of phone owner C2 / 980 1/16.
      When installing MIUI and other KIT KAT OS, most of us have the same problem: when the phone went into a deep sleep, it is impossible to re-awakened, except by removing the battery or long hold button to turn off. I agree with your statement regarding RAM and HD, but the phone is also boasts the HD and the FHD mode. The only hope the programs were red eye stay awake and Kernel Adiutor. I remind you that the kernel v3.0.0 Dreamer7 worked well (used by 25% of RAM), the phone went into a deep sleep, but is also responding to calls. The problem arises with the kernel v3.1.0 (used 12.5% of RAM) and following.

      Currently my phone works with Kit Kat OS or with the kernel Vell "aroma istaler v0.5". No problem goes into deep sleep and wakes up.

      And so I like MIUI 8 :(

      Thanks again!
      Sorry for my bad English.

       

  6. Dave@NeedRom




    02/06/2014

    Germany

    Hello nikolaslala,

    so it would be good for you (and all the other guy's with ZP980 1/16) to get back the old Dreamer Kernel V3.0?

    I will try to implement a selection routine into the aroma installer, where you can select the old Kernel instead the new one. Maybe this will help. if everything goes well this routine will be included in the next weekly release.

    If someone else have problems with ZP980 1/16 and the new kernel, plz let me know. So far it's the first post about this problem.

    Dave





    • 08/31/2013

      Serbia

      Hello Dave,
      for Kit Kat I use kernel Vell aroma Installer v0.5 of 25/02/2016, which is essentially a kernel dreamer7 v3.0.0.
      If I understand correctly, in the MIUI8_6.10.27_ZOPO_Dave_V67_Xiaomi.eu already inserted kernel v3.0.0?
      If so, I'll install this rom and reporting the impressions of the work.
      Best regards.

    • Dave@NeedRom




      02/06/2014

      Germany

      Hello nikolaslala,

      in the current version of MIUI8 6_10_27 there is still the latest Dreamer7 kernel v3.2.

      If you did'nt have try'd it out yet, please do. Serval tweaks were made since v3.0 or even v3.1. If it is not working good for you, than you can try the next release (coming this weekend if all goes well), in wich i include the Dreamer7 V3.0 kernel.

      Dave





    • 08/31/2013

      Serbia

      Hi Dave,
      I tried all the previous versions of MIUI8 and wherever kernel v3.2.0 or v3.2.1 real problem.
      I think it's just dreamer7 with this tweaks create a "problem" for us with phone 1/16.
      I'm waiting for the realization of the weekend, so when I install, reporting to the problems identified.
      Best regards!

  7. Dave@NeedRom




    02/06/2014

    Germany

    Another Question:

    Does someone use the ParallelSpace App?

    Because it is not included in the original Xiaomi.eu Rom and it is not translated in all that languages. And it uses a lot of space….

    Dave





  8. 10/11/2013

    Italy

    I don’t use parallel space app Dave! Thanks! ;)

  9. Dave@NeedRom




    02/06/2014

    Germany

    So it seems, that this week release are suspended, due to problems from Xiaomi.eu.

    Will port it as fast as i can if it is out from there site.

    Dave

  10. Dave@NeedRom




    02/06/2014

    Germany

    Newset weekly are in internal Testings, if everything goes at plan, it will be releas'd tomorrow.

    Dave


Leave a Reply

You must be logged in to post a comment.